its an autel maxisys ..i dont see any command feature ive looked through every module ..ill have to double check.. the reason why i think something is wrong is im not getting any fan at idle even when it starts to climb over 200 .. iv had it go up to 220 then i put the ac on and it came back...
hey joe thanks for all your help.. so ive come to the conclusion the fan has gone bad.. well i think at least..with my scanner the ecu is commanding 70% but its not moving.. but when i turn on the AC the command drops to 40% and it starts to spin .. when i over ride the white wire and ground it...
joe do you happen to know to what temp the fan should be turning on low ? when driving cars fine.. at isle she still getting warmer than i would like to see .. thanks again for the help much appreciated
Ok guys so installed all motorcraft stuff ..tthermostat and all.. I still can not get the stream out if the bleed tube the lower rad hose is warm now which is a plus but as soon at I lower temp to 75 ..she boils ..need some pointers
hello guys well ive been driving my self crazy with a similar issue.. its a 2005 ls 3.9 had a broken dagas bottle so i replaced (dorman) replaced the thermostat and housing (motor rad) replaced the upper hose and dccv .. when i do the bleeding procedure i can never get the stream of coolant from...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.