Recent content by Scallywag

  1. S

    cost to supercharge?

    I take it you mean positive displacement superchargers because B heads will work with any centrifugal supercharger or turbo kit. This supercharger you linked to can be used with the B heads, it's advertised for the 96-98 Cobra which uses the same heads as the Mark. However, it isn't ideal...
  2. S

    How can U tell if ya gota LSC ?

    Mr. Not that hard, it also is not that hard to look at the dates of these topics you've been responding to as they're mostly over 10 years old with some exceeding 15 years. That might not be helpful because you're pushing current topics that people could use today's information from in favor of...
  3. S

    Bags won't go back up

    You move the sensor down so that the system can think the sensors are stretched beyond "normal" and it'll deflate to "go back to normal". If you move the sensor up the system will think the car is slammed and jack up the Mark by inflating the bags. Terrible ride quality like this! Oof! The...
  4. S

    I'm back with a new Mark VIII

    I might be wrong in saying this, but I believe most of us have purchased the catback exhaust tubing kit from Trubendz. It's mandrel bent, Alum or SS, comes in OEM 2.25" or 2.5", and you can add the X-pipe for an extra $35...
  5. S

    I'm back with a new Mark VIII

    Purchasing a new set of rims might be more cost effective than re-chroming. I'm sure you can find similar looking aftermarket rims if the OEM 10 spoke style is what you want to hold onto. For example,... Security Check Otherwise, as with the OEM HIDs, you'd be at the mercy of another...
  6. S

    Windshield Wiper Problem on 95 Mark

    Try this part number I got from the workshop manual. 6C3Z-17566-A https://www.amazon.com/Ford-6C3Z-17566-ARM-PIVOT-SHAFT/dp/B001H293XU 6C3Z-17566-A - Genuine Ford Parts I've uploaded the Wiper Assembly PDF, the information you want should be on pages 5-7. Good luck!
  7. S

    It's always something ...

    It might be this tube assembly, or something similar... https://www.amazon.com/Ford-AL3Z-19972-A-TUBE-ASY/dp/B001H1ONAO and/or this AL3Z-19972-B - Genuine Ford Base No. #19972 Tube Assembly Good luck!
  8. S

    It's always something ...

    I hope this helps,....
  9. S

    I'm back with a new Mark VIII

    Yea, I would do a partial tune up being that you just bought the car. "Partial" meaning I'd do everything minus new COPs & minus fuel filter to rule out the common components that are more easily accessible. New PCV valve, spark plugs, and new COP Boots should be more cost friendly than...
  10. S

    Turn signal relay

    Well, I searched but could not find anything being identified as a relay within the cd workshop manual, though I might've overlooked it. However, something tells me it might be alongside the steering wheel column by the ECU and/or ODBII connector. Nonetheless, I've attached the diagnosis &...
  11. S

    How did you paint your Terminator bumper?

    Hi guys! I'm just looking to get an idea on who to buy paint from to achieve the closest match to my color for my Terminator bumper. Did you paint the bumper yourself or did a body shop provide coverage? If you painted; What vendor paint did you use(Automotive Touch-Up, Paint Scratch etc.)...
  12. S

    steering wheel pulsing

    In my experience, replacing the whole Hub assembly is easier than pressing in a new bearing. To confirm the wheel bearing, go for a drive and listen if the humming softens-up when turning the wheel towards the side where you hear the hum. If the hum dissipates but returns when you straighten...
  13. S

    New air ride parts done at home?

    You just need to get the tires off the ground so that you can remove them and have access to the air springs. For the front: remove the 3 bolts from the top of the "shock tower/s" remove the solenoid to vent the air out of the air-springs remove the bolt at the Lower Control Arms put a jack...
  14. S

    Mark 8 rear ride height

    The OEM screw jack should be able to get underneath a slammed Mark to lift enough to get a regular jack under. If only one end is higher, then I'd check the rear height sensor. Perhaps it got stuck or moved out of place when the rear bags were installed. Unlike the front air ride which has...
  15. S

    Salvaged Mark picture thread

    The Bad This dent seems easy to pull The Ugly Passenger side Driver's side Not sure exactly what happened there but it almost seems like it was incorrectly jacked or lifted. Those with knowledge; What is it that got worked underneath there & how should I go about fixing it...
Back
Top