Recent content by Sapperfire

What do I have to do to make this work?

Just pulled my Passenger Valve Cover

Soaking up Oil from the Leaky Valve Cover Donuts..next time those Donuts are getting BATHED in Right Stuff

First thing to Check would be the Coolant/Oil Adapter, the part that the Oil Filter attaches to, it can Breach there. I'd only worry about that if the Oil is Milky..if it Just keeps Overheating, First check that the Fan is Working properly as the Mark VIII had a Poor Connection at the Plug for...

If you're Positive that the Head Gasket is blown, Replace the Motor

Put a 5-Ohm Resistor on the Bulbs positive wire

ErMerGehrd

Wish this was a sticky

Chris that almost looks like a painted 1x6 stuck to the trunk

Cmon..make a set of solid defluted lenses with dual projectors.. Shut up and take my money!: http://youtu.be/8QfSzgV1q5g

Try flattening out the spring tab just a bit, don't over do it, or it won't pop out when you hit the release button. If by chance you flatten it too much you'll have to hold the release cable in the trunk and pick the door out with your other hand

The popper screw holes are long cut, loosen the screws a couple turns and push the popper inward, tighten screws back down