Recent content by MerkinMan

I did hit all 3 fuse boxes. Didn't wait 30 minutes, didn't know I needed to. I have inspected most the visible wires under the hood, one clip had oil in it I cleaned out but wires all looked good

I just did a draw test with my multimeter on amps and have a draw of 1.93-2.04. Pulled every fuse one by one and didn't see a significant change on any of them

..... Or not. I drove about 50 miles turned it off, then tried to start it 2 hours later and it's stalling out again. Getting codes P0113, P0123, p0180, p0193, p1120 and p01401. Also pending codes p0133, p0401 and p0452.

Seems like it was the IAC valve. Replaced it today and it's been running no problem. Now the only code I'm getting is p1401

2002 ls v6, car will run at 2200 rpms until reaching normal operating temp then stall out. Was happening intermittently now can barely get it to start. Getting codes p0180 and p0193, have replaced the fuel pump, filter and fuel rail pressure sensor(twice). Also getting pending codes P0113...