Recent content by Kissmyblass

Beautiful car...ugly wheels .........

I just replaced all 4 air springs along with a new compressor and dryer...everything was working great for 2 months untill the rear end went down. I tried filling it through the shcrader valve ...nothing..tried my old compressor..nothing..now the whole car is down and nothing will get it back...

My air springs [88 blass]work great in very cold weather ,if the car is in a heated garage overnight. But if it sits out side for a few days at -25 or colder ,the car will gradually sink down [probably from a small air leak] At these temeratures the compressor will not pump up the springs,untill...

I live in canada and when I talked to Arnott they said I would have to pay duty on the air springs because they were not NAFTA complient (some parts are not made in north america)...Then I ordered the same airsprings from Strutmasters for about the same price. Their price includes the exchange...

I just bought 2 rear air springs for my 88 blass from Srutmasters, when I opened the box (clearly labled Srutmasters) the air springs have, Air springs by Arnott INC logo on the bags. I thought these were two seperate companies. Can anyone shed some light on this subject...:confused:

What's the first thing they do to the suspensionon on Overhaulin or pimp my ride or any aftermarket vehicle upgrade show....Airbag suspension ,not brand new lastforever coils..Semi's ride on air bags...busses....there must be a reason ,the lincoln mark series was inovative in the use of this...

I just changed my thermostat,I put in a high flow 195 .I read that this is a tough job considering the placement of the bolts. Here's the easy way........easier -drain the rad -remove the upper rad and bypass hoses -mark position of the distributor -loosen distributor mounting bolt -turn...

Any info or leads on the proper procedure,,,,,,,,,,

I've always had this metalic grinding noise coming from under my car. It is relative to the vehicle speed The previous owner said it was the rear brakes,I replaced the pads and rotors , this didn't help. I know the rear dif seal is leaking as was a common problem on these [88 markvii] but i...

Where can I get replacement spokes for stock 1988 blass aluminun rims. I bought one at the junkyard for 14$ but its missing a few spokes, any ideas........

Here's a couple of vanity plates I have for my markvii, maybe other members can share thier's also.

Hope you like this,,

Anyone have any advice about changing the rearend pinion seal on an 88 blass, Ive heard these seals have been a problem, I've read lots about the preload but that should'nt concern me if I tighten the pinion nut to its original location [punch marks before removal] Any advice would be...