I have the Mustang front hubs and was shopping for the front rotors when I checked the front rotor diameters against the Mk VIII piece. I used a 1995 Mustang as my starting point. Do I need the standard rotors/V6 or the Cobra rotors? I am using the stock Mk VIII Calipers on the front. I did my...
OK, I realized I had a code reader for my 1988 Thunderbird Turbocoupe. The manual says something about EEC-IV, so I am thinking I may have one that will work, if not I may just jump the terminals and see what codes I get from the CEL.
MWHillbilly- mine is that way too, under load with low rpms. Floor it going downhill and it will SCOOT~!~ Floor it uphill and it falls on its face until you build some RPM's...
Thanks for all the replies, guys! Plug wires will be week after next- Spring Break! One of my students says he may have a code reader, if not I will pick one up. It is something simple, I am sure. It runs TOO good to be anything major.... MW Hillbilly- we are neighbors! I live in Bedford. I...
My Mark runs great above about 2200 rpms, really screams. It will still bark the tires at 60mph. Anywhere below that RPM it is a real dog, I get a miss and a backfire. Under steady acceleration, under load, I get a miss. If I floor it above that RPM level it really lets loose. The only things I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.