Recent content by giamanut

Mobil 1 is the chit 200k on my engine just replaced head gasket and you could not fell a lip on the cylinders I am the second owner and new the first owner he ran nothing but Mobil 1

I could not hold the camera with all the bloody knuckles!

good to know about the knocks the problem was indeed a vac leak the egr valve gasket. Appears one bolt didn't make it through the hole in the gasket so one side fell. So it now has the new knocks and egr gasket. I do have a slight tick on # 5 up top hoping that cleans up with the new oil.

I would not prep it yourself either a good guy will probably take off what ever you put on certain primers or sealer go with certain paints.

Yes about that

Solved it was the egr valve gasket

Okay so I replaced my intake gaskets because I had to change knock sensors anyway, and I had some bad leaks . The leaks where odd because I had just replaced the head gaskets and intake gaskets. So as it turns out after changing the knocks and installing new intake gasket I have an intake leak...

My son does mobile bumper paint for car lots I think the shop he works for gets around 400 bucks takes him about 2 hours they use bumper paint.

Rent it?

LSC8 after ...... the head gasket are nice but I did find a big vac leak

Cleaned the map today it helped keep it idling long enough to find the vacuum leaks. so now I will order the knocks and goop the hell out of the intake on assemble. I sure this will cure it they are bad leaks both sides of the intake near the middle.

Gen 1 here 200k in pristine condition Ba hA haha

Clean the MAF first it's the cheapest thing you can do...

That one fugly hood.

LaserSVT