Recent content by DragonDesign

Care to give us a step by step on how to accomplish this? I think there are quite a few people on here who would love to know how. My main problem looks to be getting the side air bag off. Also, do you have to remove the back from the seat to do this? Or do you need to make sure the seat...

I tried last week. Didn't get too far. I used a couple of pairs of pliers to pull apart the hog ring clips underneath the seat, then folded the leather back. There are more hog rings in the crease of the seat. Easy to remove, but they won't be easy to put back on without the special pliars...

Yeah, i put the factory (those hideous chrome 5 spoke non-sport ones) rims on and tightened everything down. They don't actually rub as the wheel turns, but they're just close enough to make marks on the caliper paint. I guess i put on too many coats haha. I'll keep an eye on them, but...

Well the pads fit over the rotor once everything is assembled, and the rotors are the same thickness. Correct me if i'm wrong, but isn't it the caliper bracket that doesn't move? The caliper slides back and forth along the bracket so that it can stay tight to the rotor. As the pads wear down...

So i spent the afternoon replacing my rotors, cleaning up my wheel wells and replacing front brake pads. I also painted up the calipers while i was in there - red for the caliper with black for the surround bracket in case you're interested. So here's my problem, I put everything back...

alumirust Here's something bizarre - I know the trunk lid is aluminum because I couldn't get my GPS antenna to stick with it. The interesting thing - i have a couple of little rust bubbles starting on the trunk, 2 to the left of the DS tail light and 2 on the top of the hood. Correct me if...

I think that's the one that I tried hooking into, but it didn't work. I just gave up on it and rely on satilites only - but it's never gone down. Only annoying thing is the intermittent "Check Speed Pulse" on the screen.

I agree with Aserrano, the lip is the best visual piece to add (on a non-LSE bumper anyway). Makes the front end look a lot more sporty and yet it's flexible enough to take punishment unlike fibreglass body kits. And yes, Aserrano is the first one to have done this and we should all...

Well I just spent 3 days in the snow on holidays and after going through snow banks and stuff the piece is still on strongly. It hit a couple times on snow banks and seems to be fine because it is flexible, but that isn't to say you couldn't rip it right off if you popped over a big curb or...

I'll have to measure the piece next time i'm outside, but from what I remember it's about 3 1/2" deep at the widest part. It gets narrower towards the wheels though. And yes you're right, with the end piece I was trying to leave it longer so that it would give the end a finished look. I...

Hey Justin, have they sold yet? I didn't have time to do the research this week, but I'm still interested.

I got the idea from Aseranno haha, and I think a friend did it for him. I just posted on the other thread with some really bad night time pictures, but it's something to look at until the sun comes up I guess. Anyway to the question at hand, I measured ground clearance on mine, stock...

I've actually used them all summer, but took them off for winter up here. I went with either 245 or 255, dont remember which. What would happen if I lowered the front and left the back stock? The back looks lower than the front right now anyway (I had another post about this at one point)...

Ok if this worked, here are the pictures in the dark. Note that #1 my car is filthy right now and #2 my headlight eyebrows aren't' white, they are a bit reflective, so with the flash on the camera they end up looking photoshopped haha. FYI the ground clearance on stock suspension with stock...

Question, the offset on my 18s is +40, and it seems like they stick out far enough that with a 1" drop they're going to rub a lot. If I look at the side, the rubber is almost flush with the side of the lip of the fender, so I'm expecting a lot of rubbing if I do it. This is only on the rears...