Recent content by Comptons04LS

  1. C

    Please help...won't start

    Thanks for your help! It was a bad ground from the bAttery. It was were the car had been rear ended and I had it fixed and they painted where the ground was connected to the car!
  2. C

    Please help...won't start

    I tested one main fuses to a diff. ground and it's reading 2.6 volts with the key off
  3. C

    Please help...won't start

    Ok I let the battery charge for 4 hours last night. I hooked it back up and still have no power at all. I have checked the fuses and relays and the only blown fuse fuse was for the cig lighter. I just hooked up jumper cables from my tahoe to the ls and still have nothing at all. Going to...
  4. C

    Please help...won't start

    I ohmed all of them
  5. C

    Please help...won't start

    12.8
  6. C

    Please help...won't start

    And yes your correct...I have no lights at all
  7. C

    Please help...won't start

    Yes I have checked all the fuses in all 3 locations and I also checked the relays.
  8. C

    Please help...won't start

    And I have no power of any kind
  9. C

    Please help...won't start

    I tested the battery with a volt meter
  10. C

    Please help...won't start

    I drove the ls home from work and parked it then came back out to leave and it won't start. The battery is fully charged and the fuses are good. The car won't even turn over...no radio lights my key fob won't even work. Any suggestions on what it could be?
  11. C

    Anyone interested in full led interior conversions?

    Sorry for the 2 same posts but I thought it didn't go thru!
  12. C

    Anyone interested in full led interior conversions?

    I need it done in my 04. How much and what do I need to send you
  13. C

    Anyone interested in full led interior conversions?

    Hell yea I have a 2004 lincoln ls and I want a full blue led conversion. Can you do it and if so how much and what do I need to send you?
  14. C

    Since some people weld here

    Welding is my bread and butter. I weld and fit everyday on code pressure vessels. I weld anything from exotic metals,hr120,nickel,ect. and of course your normal stainless and carbon steel. They key from getting headaches and getting sick is proper ventilation. You should always have something...
  15. C

    Need 100 shot advice

    Thanks for your input bigrigls. I know it would prob be better on a different car but I like being a little different than other people. As soon as I can get it installed I'll update everyone with pics and drag slips.
Back
Top