I had the front apart for strut rod bushings and since then alot of times if I take off from a start and get above 1/4 throttle the TC light comes on and it takes power like I'm spinning. If I stop and turn it off it drives fine.
If I had a bad wheel speed sensor would it turn on the check engine light? I left the wheel sensors plugged in but removed the wire from the hangers and didn't stretch them, I left the spindle on the lower ball joint. Any suggestions?
If I had a bad wheel speed sensor would it turn on the check engine light? I left the wheel sensors plugged in but removed the wire from the hangers and didn't stretch them, I left the spindle on the lower ball joint. Any suggestions?