Lincoln vs Cadillac - Do It Yourself Car Repair   Cadillac
Lincoln vs Cadillac Forums - - - LVC Tech Articles Home


Removing the Air Cleaner Outlet Pipe on the V6 Lincoln LS



Lincoln LS

Submitted by: Quik LS

Removing the Air Cleaner Outlet pipe is one of the most common things you will have to do.

Most do it for to upgrade to a Cold Air Induction kit or for access the accessory belt, intake manifold, coils or spark plugs.


Air Cleaner Outlet Pipe -3.0L


1.       Disconnect the intake air temperature (IAT) sensor electrical connector.

2.       Disconnect the aspirator hose from the air cleaner outlet tube (9F805).

3.       Disconnect the positive crankcase ventilation hose (6853).

4.       Loosen the hose clamp screws and remove the air cleaner outlet tube.


 CAUTION: The air cleaner outlet tube should be securely sealed to prevent unmetered air from entering the engine.

1.       To install, reverse the removal procedure.


This area is intended for Tech Tips submitted by members of The opinions expressed here are the opinions of the individual author and do not necessarily represent the views of Undertake these procedures at your own risk. If you have any comments or questions please contact the individual authors. Reader assumes all the risk associated with the installation of aftermarket products. and its owners are not responsible for any direct or indirect damage to the vehicle, person or persons and the resulting costs incurred from the installation or use of these products. recognizes that "Cadillac" and "Chevrolet" and their respective logos, model names and numbers are registered trademarks of the General Motors Corporation. These and other terms used on this website are used for identification purposes only. is not affiliated in any way with the General Motors Corporation, Cadillac, Chevrolet, Mobil or any other website or company listed herein.