mach8
Well-Known LVC Member
Got where I was going and turned the key to the off position and nothing happend!
After some hunting around I was able to operate the ingnition switch with a screw driver. I had to pull the steering column and disassemble it to find the little pin that connected the upper and lower lock lever actuator had come out so they were no longer connected to each other. Don't Know how that happened, there doesn't look like there's any room for that thing to move.
That column was a real pain to get back together but everything is working fine now.
After some hunting around I was able to operate the ingnition switch with a screw driver. I had to pull the steering column and disassemble it to find the little pin that connected the upper and lower lock lever actuator had come out so they were no longer connected to each other. Don't Know how that happened, there doesn't look like there's any room for that thing to move.
That column was a real pain to get back together but everything is working fine now.