Interior Door Handle?

Dubbed_LS

Well-Known LVC Member
Joined
Jun 10, 2008
Messages
200
Reaction score
0
Location
Somewhere in,
Does any of you know about how much those cost?,.

because one day i tried to get out of the car and found that i was unable to exit the vehicle.

and i took to the door panel off thinking it was a cable that got disconnected. but for that the back piece of the door handle is broken which connects to the unlock/lock lever, which when the door is opened it pulls the lever which allows you to open your door.

so i found that there are pieces missing, im guessing they broke off. because i can see where it was broken off..

so any help would be appreciated..
 
Hi Dubb

If it is the inside left front door handle it is the "control" as ford puts it and the p/n is yw4z-5421819-aa with a list of 64.82 and your cost of $46.67 ready to ship.
please contact me directly if you would like me to ship to you.

Max Zuckerberg
Parts Specialist
Five Star Ford
7100 east Mc Dowell Road
Scottsdale AZ 85257
Direct 1-800-866-1520 ext 236
Fax 1-480-949-8478
parts@fivestarford.com
 
thanks mrzee. i went to a ford dealership and they was talkin about 87$ to get a new control.
 
go with max. i got mine from him and it was the best deal around. also, i took it to someone to get it done and they did it for 25 bucks.
 
I had to replace the "control" on the driver's door on my '00 LS. It's a b!tch to do! You're either gonna need a corded, not cordless drill or have a professional do it. The 3 rivets holding it on are made of some seriously heavy duty alloy.
 
I had to replace the "control" on the driver's door on my '00 LS. It's a b!tch to do! You're either gonna need a corded, not cordless drill or have a professional do it. The 3 rivets holding it on are made of some seriously heavy duty alloy.

+1 on being heavy duty. they guy who did it for me just drilled out the rivets with a drill bit and then hammered them out. the only thing that you have to be careful of is that they do not bang it too hard due to the fact that they may break the glass. other than that it's not a hard thing to do.
 

Members online

Back
Top