Double Din

[LennDawg]

i know there were problems with brackets when putting a double din in an LS... i have a 2000 LS and if i want to put a double din deck into it, what would i need? i came across this http://www.trademotion.com/partloca...fo&PartID=327271&siteid=214270&catalogid=4014 ... is that all i would need to fit a double din unit in?

 

[Vivid LS]

You should only need that.

I have an extra one of those exact units if you are interested. I will do $50 shipped if you want it.

I could send it back but I just figured I would try to get rid of it first.

Let me know

 

[ltnate3]

i know there were problems with brackets when putting a double din in an LS... i have a 2000 LS and if i want to put a double din deck into it, what would i need? i came across this http://www.trademotion.com/partloca...fo&PartID=327271&siteid=214270&catalogid=4014 ... is that all i would need to fit a double din unit in?

Yes, all you'll need is that part for the surround and then drill some additional holes in the factory brackets. The hardest part is lining everything up but not a very hard install at all.

 

[Flame3g]

i know there were problems with brackets when putting a double din in an LS... i have a 2000 LS and if i want to put a double din deck into it, what would i need? i came across this http://www.trademotion.com/partloca...fo&PartID=327271&siteid=214270&catalogid=4014 ... is that all i would need to fit a double din unit in?

yeah its very easy with the nav bezel piece. if u do a search u will see some good results. i had to cut the metal bracket that came with the deck to make some bracket the attached them to the unit then the unit to the factory brackets. I have a kenwood ddx-7017