napoleon1072
Dedicated LVC Member
I have a conti and switched out to springs a while back and want to remove the Check Air Ride warning, anyone been successful with this yet?
Any of you Mark guys managed to get rid of the Check Air Ride warning on the Dash?
- Thread starter napoleon1072
- Start date
zmt325
Dedicated LVC Member
search it out and you will find your answer. i did it but do not remember detailed enough to instruct
black and green wire
under dash
that is all i remember
black and green wire
under dash
that is all i remember
87TTOPGT420
Dedicated LVC Member
Search google, there is plenty of info on getting rid of message
johnnyjaws
Active LVC Member
did you splice the wires under the back like your supposed 2when you buy the kit they tell you how to do it
the1andonlyGR81
Dedicated LVC Member
if its the same as mark viii you have to cut the green wire with the grey stripe if i can remember off the controller. have to look at the sheet.someone here posted a exact picture once. may have been laser or righonthemark