Search results

I ask as I'm looking for some front seat for my Towncar. Thanks, Rob

From your pic above it looks like it already has mass air. Take a look at the airbox. I too have a 90 w/5.0, but its still speed density(from a mk7). Maybe its a California thing. I know that they started off early in putting mass airs in the mustangs. Mine is Rebuilt to stock 5.0 H.O...

Anyone has or knows where I could find some newer model front seats for my TC. I would like to locate something out of a new wrecked car before I decide on having my own re-uphostered. thanks, Rob Humble, TX. 90 TC Cartier w/5.0HO

85mph I have a 90 Catier and it has the digital speedo, but even though it only shows 85, you probably are going faster. Duals are ok, but you reallly need to get the HO upper and Trottle body. Those made a big difference untill you can do the total HO conversion. I rebuilt it to HO spec and...

I just converted to coil springs on my 90 TC. I have everything still on the car, but disabled. Anyone interested in those parts let me. I'll let it go for very cheap. Note that I caught the leak early and the compressor hasn't been overworked. Only came on for about 5-8 seconds during...

Add another 90 TC w/5.0 HO Atascocita, TX Rob

I'm off next week, so I'll do a complete flush. Thanks, rob

On your point #1. I had the front up. And with a slight pressure on the brake pedal, I was able to spin the drivers front tire and not the passanger side. Hence one caliper was getting more fluid/pressure or the other was not and possibly a restriction in the line or in the solenoid valve of...

Anyone had to replace their ABS hydraulic unit. I think mine is bad. When I brake I get a slight pull to the right. In the past year I replaced all ball joints, tierods, idler arms, shocks, pitman arm, had it aligned. I just recently replaced both calipers again. Only thing I can think of...

You might not have much of a choice if you want roller. You can probably go with a non roller, but then you have to break it in. When I redid my 90 TC, I thought I was ok with a roller truck cam which was a little smaller than a factor HO cam, but I had to go with a SD computer from a 88...