Search results

I'm looking for a good set of Mark VIII rear lower control arms and knuckles, bushing condition not important. The lower control arms must include the 4 Torx bolts and nuts. I don't need the hubs with the knuckles. Pickup at Carlisle would be perfect.

I'm not expecting mineshaft air, but the DA should be just under sea level. :cool: Stop by if you're in the area. ;)

I've never paid much attention to posts about Gen 1's, so this probably has already been posted. :rolleyes: I installed a pair of HID housings and an aftermarket HID kit (using my adapters, of course :cool:) in a '94 today, and was suprised to find that I had to modify the header panel in...

Anyone got one of these lying around? I don't know if they're Gen 2 specific, but I suspect that they may be.

So-so air (DA 361). Still more left in the tune. :cool:

Looks like the air should be pretty good. :cool: Unless you've got friggatriskaidekaphobia. :p

The stock oil pan removed from my 60K mile '98 LSC. Excellent condition, oil level sensor not included. I also have the stock oil pickup if you need that (+$25 - top in the picture). $150 shipped (lower 48)

Brand New FRPP Cobra Rear Hubs and Wheel Bearings. $325 shipped (lower 48), payment via PayPal

A pair of new Moog (K80053, K80055) front lower control arms. With greasable ball joints, not the TRW castings. $110 shipped (lower 48) payment via PayPal. (Stock Photo)

I found these in a box in my garage today. They came from my Thunderbird SC quite a few years ago. $40 shipped (lower 48), payment via PayPal.

If you have a rattle, it might be a broken door glass retainer. This is the rear track that the window descends into as it is lowered. Even in my low mileage originally Florida car, rust ate through the spot welds. :( The Ford p/n is F3LY63222A01A, and it is obsolete, although Vintage Parts...

Tomorrow I start bolting everything back together. More details here: http://www.lincolnsofdistinction.org/vbulletin/showthread.php?t=34748 Here are a few teaser pics. :cool:

I'm looking for a nice Gen 2 K-Member. I'd also like a complete set of Gen 2 motor mount brackets, both upper and lower. I don't care what shape the rubber mounts are in. Within driving distance from NJ would be nice. ;) I have a little winter project I'd like to get started on. :cool:

A pair of lightly used Addco 1 1/4" front sway bar collars with new 316 stainless socket bolts. $20 shipped (lower 48), payment via PayPal.

Decided to finally do a J-Mod and install a temp sensor in my LPW pan. After looking for it a bit, I did some research and found that '98 4R70W's don't have the screen (1st pic) that the earlier transmissions had. Discovered that the lower 1/2 spring was broken in half (2nd pic), which...

I recently installed some new Firestone 275/40-17 tires on 17x9 rims with a 36mm offset on the rear of my '98 LSC. I ran into some clearance issues, so I bought a new toy. :D I released the air in the rear bags, disconnected the sway bar and jacked up the wheel/tire to see where the problem...

New or like new only. Pics and price shipped to 08731 to dlfraleigh@comcast.net Thanks.

Here's a unique opportunity. ;) A brand new pair of Gen 2 front shocks. Got good bags, but worn shocks? Here's the answer. :cool: Comes with the upper hardware and both upper o-rings, as shown. $120 shipped (lower 48) I also have a decent used passenger side air bag, some cracking...

I need one good OEM Gen 2 driver's side shock/air bag for my LSC. Pictures and price shipped to 08731. Thanks.

I need a couple pairs of these washers (circled in green). Price per pair shipped to 08731, please. Thanks!