Search results

Gear indicator shows "E" Car is a 2000 v6. 5r55n transmission. Original foundry stamping of 22. Replaced with foundry stamping 21 Car will move, and shift through gears on the lift (verified with SnapOn Solus scanner) Pulling codes as follow: p0713 p0743 p0750 p0755 p0760 p0796 p1746...

Hello folks. A friend of mine called me yesterday to come look at their 06 Zephyr, saying it began to run rough out of nowhere. car has alot of mileage (175k) but is up to date on maintenance. I scanned it and got multiple cyl misfire, and misfire cyl 4,5,6. I thought it was odd for...

Pulled into work this morning, and the trans slipped, made a loud bang, lots of smoke from under the hood, then fire. Was able to grab a fire extinguisher from my shop real quick and put it out. Car doesnt move at all now. Time to find a transmission. Anyone know of any V6 1st gen...

http://www.xkrt.co.uk/ Take a look at this company. they can supply a custom Tremec transmission, with custom bellhousing (to mate to AJ-V8), a Quaife LSD, and a "black box" as they call it, to take care of the PCM side of things. Might be worth contacting them, especially those who...

I've been having an intermittent no-start issue on the LS for about a month now. When I go to crank it, it does nothing. PATS light is solid for a few seconds then turns off (when key is in RUN position). I can feel the under-hood relays clicking, and have swapped the blower, PCM, and...

Anyone know if the rear lower control arms are the same for 00-02 and 03-06?

So I am almost done painting my new wheels... And had an idea for the center caps. I have sprayed them the same color as the wheels (Graphite Mettalic) and want to add the Lincoln logo. I was thinking about taping it off and spraying the logo in red on each center cap and then clearing over...

Tires will need replaced, but great for a winter set. They are the wheels in my sig picture. I will post more pics tonight. $200.

Bullschmidt sold me his 05 fogs for a price I couldn't pass up. Swapped them out today. Gen 2 fogs look so much cleaner and updated than the gen 1. Should have pics up tomorrow. Alot of dremeling and drilling to get them on :)

Before I get the "search" comments.... I've been reading up on the no heat issue, and I see alot about the auxiliary pump going bad, causing no heat @ idle. A few weeks back, I drove out to Detroit to pick up a fender (closest yard I could find with a Silver Frost driver's fender in good...

Anyone see these yet? http://cgi.ebay.com/ebaymotors/2000-06-Lincoln-LS-Adjustable-Front-Sway-Bar-Links-/310085139520?pt=Motors_Car_Truck_Parts_Accessories&hash=item483283bc40#ht_500wt_1182

I have a gen2 V8 KKM intake for sale in good shape. Didn't realize it was gen 2 until I got home and saw that my MAF sensor won't fit, and that the first gens are black. (oops) Asking 100. Make an offer.

I installed the 30mm energy suspension sway bar bushings a while back (probably have 20,000 or so miles on them now.... And I've been having some noise lately, almost sounds/feels like the sway bar again. So I lift her up, and check the sway bar - and to my surprise, the sway bar was WAY...

So I recently bought a set up eibach springs from a member here. Unopened box and all. Got them installed. I've given them several days plus a 400 mile roundtrip drive to Detroit to settle. And now I'm noticing the driver's side (both front and rear) is roughly 1" higher than the passenger side...

So I came across a full gen 1 black interior on eBay today... And they are definitely 1st gen seats... But the seat has perforated leather and a Lincoln emblem embossed into the backrest. I've seen this only once before... Any idea which cars these came on?

Capt. America, standing on top of a silver 1st gen LS. http://youtu.be/wKJRq7epFDI Tried embedding the link, but it didn't work.

Has anyone ever experienced seat recline issues on the 1st gen LS? For quite some time now, the reclining seat back has been on the edge of complete failure. Any amount of pressure on the right side of the seat back will cause it to completely collapse. I had finally found a "perfect" spot...

thats what a completely sheared motor mount looks like :)

...

I will be doing the coils and PCV valve and elbow this weekend. So far, I have ordered the valve and elbow from the dealer. ordered intake manifold gaskets from the internet and ordered these coils... http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270735102889&viewitem=...