Search results

You're welcome! I'll check back and see how it went.

If you let it air up, and you get out of the car to turn the switch off, the car will only vent down when the door is shut. It doesn't always vent immediately, but it can... It could be within 5 seconds, or minutes later. The air ride is active for 45 minutes after the car is shut off. You...

Ther other thing it could be, is on the top of your air shocks, there is a rubber bushing where it mounts. Those have been known to leak, but rare. You can take the shock tower cover off and spray soapy water and look for bubbles. It's likely only a problem with one of them, and not both. When...

Your front air shocks are cracked around the edges where the car would normally sit at parked height. Two days isn't bad, but it will get worse with time. When you turned the switch on and let it air up again, it usually will go above where the parking height is. What you done was turned the...

I would also say you have a vac leak, as for the fuel economy. At the same time though, it sounds like you have what we have always referred to as torque converter shudder. Someone on here back in the day always swore by some stuff called (Dr. Tranny). LubeGuard 19610 Dr. Tranny. Comes in a 2oz...

If one bag is factory and one is new, my guess would be that the o-rings got damaged when you replaced "the one". If it's not able to hold its air, the old one likely has cracks all the way around from sitting for so long (33,000 miles) and it's unable to hold the weight of the entire rear end...

I think this was what was being used

Yes, it'll work

I bought one from Carlos. He'll send you whatever color you ask for. I think his eBay name is racebronco or something like that

A lot of the guys went with the 55 watt and none ever experienced the plastic melting. This even goes for the Gen 1 housings, which are smaller and closer to the plastic. Gen 1's originally came with 65 watt halogens, which produce too much heat and they eventually burned the inner chrome. I...

No problem. Been a while since I've been on here and this has been a boring weekend lol. I'll probably be popping back in next weekend.

Washed the hell out of it, after having 7 1/2 inches of rain so far this month.... More coming on Tuesday but at least it'll be clean for a couple of days.

Seems to be correct. They make them with blue gasket and orange gasket. Many have said that the orange gasket was better but I don't remember their reason. There are many many write-ups on this and it is definitely not a fun job, whatsoever.

HID conversion kit help please..... Bullymong88, you just so happen to have the adapter rings that Jay made, and still might be making. They're needed for Gen 2 Marks. 9006 bulbs. I have HID's in my low and high beams. Been working for over a decade now. Some like 35 watt and some like the 55...

There are a series of LEDs under the shifter to make it light up. The Gen 1 also lights up but it only has one bulb under there.

As far as I know, most all of them will be aftermarket, especially when searching for Mark VIII bushings. If I'm not mistaking, I believe some Thunderbird bushings will work and would likely be easier to get from Motorcraft. It's also been 8 years since I have seen this talked about on here, so...

I have no idea on all the bushing prices. Been a while since I done most of mine. You could probably check eBay for a good seller that carries Energy Suspension bushings and get a decent deal. For obsolete bushings, a guy named Jay made them and sold them on here. I believe his username was...

Some have installed the small tweeters up in the pillars, and some have taken out the factory tweeters in the upper door panels, and replaced those. I can't remember what size that hole is in the upper door, but if you have it, it's a good spot. If your car came with the JBL Premium system, then...

Thank you both! I do have exterior pics. My son (17) takes them all the time. Some other things I had bought for it before they sold out were headlight housings, side-parking light housings and a new grille. Most of it came from Tasca Parts

I used Kicker 6X8 in the rear and JL Audio 5X7 in the front doors. Either one of those sizes works fine for the front or rear.