Search results

  1. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    So according to alldata, fuel pressure KOEO should be 14psi, I’m at 45. KOER should be 39psi, I’m at 55! Is 39 the correct fuel pressure?
  2. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Key on/Engine off, wot on accelerator. Should I hear a constant humm or buzz from the throttle body? Every once in a while the butterfly will twitch. Seems odd.
  3. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    How about injectors? And what’s a good temp on cats?
  4. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Tips on testing injectors? Can I test the catalytic converters myself?
  5. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Ok. It’s been on for a month or so but I’ve heard people say there is a relearn process. The TB had a tag saying something about it as well but no specific instruction. Was just curious.
  6. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Do you know the relearn procedure for a new throttle body?
  7. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    But the biggest thing about it all is the fact that only once it’s warm it begins to run rough. Prior to that it’s fine. Going to focus on the wiring for the ETC first and see if maybe once the wiring is getting warm maybe there’s a wire with an issue.
  8. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Yes, this is the replacement PCM. So either the first PCM was either good and the problem was certainly something else. Or the culprit for the first failing PCM is causing this as well. OR the problem really isn’t the PCM at all still. I printed off a bunch of wiring diagrams and I plan on...
  9. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    If it’s in fact the pcm AGAIN, what should I be looking at as far as the pcm taking another dump? Wiring, grounds? Etc.
  10. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Here’s what’s happening to my throttle control when it starts running bad. From top to bottom ETC [TAC_PCT] ETC_ACT ETC_DSD TP.OBDII TP1
  11. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Btw o2 sensors are changed. No change once operating temp. Keep getting P2110 and P2107.
  12. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Yes that was at idle
  13. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Will you also check and see if yours will start and run with the maf unplugged. Mine may start, but dies right after.
  14. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Check out the o2 readings for sensor 1. Bottom 2 lines. Is that normal?
  15. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Here’s the voltage
  16. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Are you wanting voltage number?
  17. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    That’s about where I’m at. I’m just so baffled as to it running perfect until warm, and then when it does go to etc failsafe it runs rough, but under throttle it clears up. I talked to the previous owner and he said he had the O2 sensors changed at one point and he said the symptoms sound...
  18. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Or what about an actual actual accelerator position issue? Would it cause a crap idle? Once I press on accelerator it clears up after 1500 rpm or so.
  19. D

    Out of ideas, can't fix ETC Failsafe.. Please help.

    Wondering if I should consider having the pcm flashed again?
Top