Separate names with a comma.
[ATTACH] Just pulled my Passenger Valve Cover
Soaking up Oil from the Leaky Valve Cover Donuts..next time those Donuts are getting BATHED in Right Stuff[ATTACH]
First thing to Check would be the Coolant/Oil Adapter, the part that the Oil Filter attaches to, it can Breach there.
I'd only worry about that...
If you're Positive that the Head Gasket is blown, Replace the Motor
Put a 5-Ohm Resistor on the Bulbs positive wire
Wish this was a sticky
Chris that almost looks like a painted 1x6 stuck to the trunk
Cmon..make a set of solid defluted lenses with dual projectors..
Shut up and take my money!: http://youtu.be/8QfSzgV1q5g
Try flattening out the spring tab just a bit, don't over do it, or it won't pop out when you hit the release button. If by chance you flatten it...
The popper screw holes are long cut, loosen the screws a couple turns and push the popper inward, tighten screws back down
I'm doing this, just ordered my spoiler
They make little triangle sanding disks for the dremel , try one of those for a corner....
Please start a thread for those lights Big Pip with some detailed step-by-steps
Same as changing the filter on a Gen2.. That's why I'm getting an FRPP filter relocation kit