Separate names with a comma.
I took this "total"...[ATTACH]
[ATTACH]... and rebuilt it to this...[ATTACH]I used a parts car and did most of the work myself with the...
Starter solenoid is heat soaking?
I've always heard you want as much caster as possible, so I don't think I'd lose sleep over it. Could just be a glitch in the software?
I couldn't swear to it but I've seen the Town Car compressors and they are not much like the Mark VIII compressors, so I would say no.
It's not the air suspension, it's the worn out suspension bushings and shocks(front/rear). If the bags hold air, they are better than coil springs...
My '93 from way back when...1993 Lincoln Mark VIIIIt's a lot different and a little bit quicker now (see sig). I need a new page. o_O
Boss 5.0L Modular block, stroked to 5.3L, Kellogg crank, Manley rods, Gibtec pistons, Fox Lake "B" heads w/ PAC Racing valve train, Hogans intake,...
Specifically it is a 10mm x 1.0 metric tube nut on 3/16" brake line with a bubble flare.How to find what type of flare is on your brake line
From this...[ATTACH]To this...[ATTACH][ATTACH][ATTACH]I kind of like it. :)[ATTACH]:cool:
Tuned the Blue Flame on the dyno...[ATTACH]
The fuel pump only runs a second or two when the key is turned to ON. This is normal. But it should build pressure when it does.
When it comes to torque converters, you have good or cheap.Pick one.
Not likely a valve. You could easily pull the valve cover to inspect though the drivers side (#7) is a PITA.
Installed a new tensioner, idler pulley and belt.[ATTACH][ATTACH]
My '96 has 4.10s and makes for a fantastic /highway/ car.