ssls1787
LVC Member
does anyone know the wheel offset for a 2000 Ls. and has anyone experimented with any aftermarket wheels. im actually thinking of putting a set of black cobra R wheels on my ls.
Aftermarket wheel offset,
- Thread starter ssls1787
- Start date
HyeLifeLS
Dedicated LVC Member
The stock offset is 60, anything above 40 is good for aftermarket. Do Cobra R wheels have the LS bolt pattern?
Quik LS
Dedicated LVC Member
IIRC - mustang is a 5 x 4.5" - no? or do you mean styled like a cobra r?
nickandersonLS01
Dedicated LVC Member
I already looked into doing this, couldn't find any with the correct offset. I won't be experimenting with any spacers either.
G
GrayGhost1
Guest
I wouldn't go any less than 38-40mm of offset. Any less and the wheel will start to move flush with the fender well and that will cause some rubbing issues. Not to mention possible bearing issues.
ssls1787
LVC Member
what is the bolt pattern for the ls?
2002OhioLSE
Active LVC Member
5X108
nearlyhalfamile
Active LVC Member
They make Cobra Rs with the 5x108 bolt pattern.
http://indycarz.com/uploads/attachments/hpim0582_626.jpg
http://indycarz.com/uploads/attachments/hpim0582_626.jpg
Dead President
Well-Known LVC Member
5x108 is very close to 5x4.5 hope they didnt install those. make sure where you buy them from they are 5x108 and atleast 40mm+ offset
ssls1787
LVC Member
where did you find those at? ive looked on a couple sites and all they have is the mustang bolt pattern. and were they available in black?