havent replaced it yet i have one ready to replace ive been looking for a shortcut to bleed the abs unit but forscan wont bleed gen 1 as far as im told by moderators ...wonder if anyone has used torqe or similar ap and got there gen 1 bled... i need to make sure im ready to replace the unit as being properly backed up (asbuilt data) although motocraft site is promising since you can down load the modules for your vin.... transfer vin also is important but i dont see the option yet or understand what or where it is contained in the module or string ... saw your post for your new adapter j234 ?? hows that working? i saw a ford guy on you tube run through ids key on key off and replace the vin on a pulled pcm but havent seen how to do that yet in forscan or even the info regarding the vin for an ABS unit just a few strings out put for asbuilt data and minor changes via cfg files for modules with gen 1 ...what is there to work with without a breakdown and options list? ... mismatches are hard to work with too regarding proprietary software flash tools file lengths and such wont just let you but wonder if anyone has been able to push the changes they want to the car with success like i dont want 1-2 tied and need to possibly correct the vin or ill have DTC errors just running diags