Gen 2 Sport Sway Bar Size

nghtshd88

Well-Known LVC Member
Joined
Feb 1, 2011
Messages
469
Reaction score
36
Location
New Jersey
Changing my front bumper endlinks tie rods and figured it would be a good time to do the bushings as well up front. Last I attempted the rear it wasnt possible without dropping the subframe..

What size or kit from energy suspension works with these?
 
9.5171G 1-3/16" fits, but better to leave the original ones on if they are not truly bad. It is a major pain to cut the factory ones off, and then you will have to add some clamps or something to keep the bar from sliding from side to side.
 
They arent badly cracked but 15yrs in the northeast? Id think despite the torching/sanding to get them off id think some new urthane ones would feel much better with the new bilstiens.

I had this same issue on my mustang just used hose clamps to keep them from moving but I believe they sell cheap collars for this reason.
 

Members online

No members online now.
Back
Top