What did you do to your LS today?

^those go great with the slight tint of the reverse lights.... Had mine for years
 
exactly my thoughts also. did you not get the bubbled ones? I had to have the flat ones.
 
good stuff, yeah it's going to make a difference specially for the front plate on Hite's plate bracket.
 
did some refinishing today....

20140809_174432_zps5746f39e.gif

20140809_174504_zps8065c7c2.gif

20140809_174452_zps2aeca05d.gif


turned out well
 
also polished and sealed the only paint I have on my car now !!!!!

20140809_181852_zps38e7de13.gif

20140809_181902_zpsc23930c3.gif


not perfect, but pretty good... but the best that can be done without respray

20140809_191933_zpsfef0ba02.gif

20140809_192201_zpsd4e874fd.gif


Installing and wiring tomorrow
 
Those refinishes are like new! looks fantastic!
 
My spar urethane coating has worn off after a year. Must be the harsh winters here and I think Optimum PoweClean did a number on them too during my spring detail. Going to be trying something else.
 
Battery was completely dead today. Was not surprised, thanks to some long ago advice here that certain sounds and events during the reconnection of a battery meant it was going to die. Thank god I kept my F150, fired that up and continued on my errands.
 
pulleys.jpg

Changed out accessory drive belt system parts. runs much quieter now on fresh belt.
old bearings worn out. new tensioner pulley was smaller diameter than stock.

pulleys.jpg
 
ES.jpg
Removed the Universal Energy Suspension bracket and bushings as they are not a good fit.

1.jpg
Replaced with original brackets and REIN Jaguar bushings.

2.jpg
Fits like OEM. Bolt near the DCCV was a PITA again!

ES.jpg


1.jpg


2.jpg
 
20140810_093106.jpg
Front end is still apart somewhat.

20140713_143319.jpg
Loosened up the Upper Control Arm nuts.

20140713_143319.jpg


20140810_093106.jpg
 
M4rk said:
My spar urethane coating has worn off after a year. Must be the harsh winters here and I think Optimum PoweClean did a number on them too during my spring detail. Going to be trying something else.
Click to expand...

Second that.
 
thanks guys... I hope they last longer then a year !?!?! (we'll see)... I was able to buff his pretty smooth without the urethane (contemplated not even adding it) if they wear faster then mine (not so smooth), I may be on to something.

If so i'll try on a "not so perfect" polish, perhaps the urethane needs more to grab on to....hmmm
 
You must log in or register to reply here.

Members online

No members online now.
Total: 260 (members: 0, guests: 260)
Back
Top