Recent content by P Rock

....I should have also mentioned this happened with the old tires too. They were the same brand/model though. How much is it to replace the wheel bearing (roughly)? What have you guys paid?

When I'm on the freeway at higher speeds, there is a hum coming from the trunk area. The faster I go, the louder it is. Under normal city driving (lower speeds) I don't hear anything and all seems to be normal. Through search, I've come across two possible suspects....wheel bearings or...

I forgot to mention my stock changer is the one in the glove box. Don't know if that changes anything though....

I have an Alpine head unit that came out of my Acura NSX and I'm looking to install it in my LS but I was wondering if there's any way of making the stock 6 disc changer work with it. Any input appreciated.

If you want something cheap, get a late 80's Mustang 5.0. I had an 89 LX 5.0 I picked up for $4500. Mods are super cheap too...you can have a 10 second car for under 10 grand lol. If you come into some money later, get a 93-98 Toyota Supra twin turbo but I warn you... used ones on the LOW...

Hey all, my passenger side foglight works when it wants to, about 50/50 of the time. When it first went out, I removed the bulb to replace it and I noticed it wasn't burnt out and that the buld was still good. One key thing I DID notice though was parts of the harness (on the bulb AND...

I don't feel any misses anymore. Car runs as smooth as ever. I don't know why the CEL came back on but I think there's another ripped boot in there somewhere. Car does feel MUCH stronger though so i don't know if I have a miss or not. WOuld I feel it with one cylinder missing like I did...

....I spoke too soon. Check engine light came back on but the car IS still running like a champ. I think I have another boot that is ripped. I will pull them tomorrow. Thanks again!

beaups you are 100% correct. I bought two boots from the lincoln dealer today ($12 a piece, yikes!!) since I remember two of them being ripped at the bottom. I replaced the boots on the cylinders the computer told me were misfiring and now it runs like new. I love my LS8 all over again :)

I had the codes pulled today and it says the miss is in cylinders 1 & 2. Thankfully, they're in the easiest cylinders to get to. When I changed out the coils, I didn't get the rubber boots along with it (generic coils). I doubt it but could this have anything to do with it? I did notice a...

I also wanted to point out that the car was running like crap when I got emissions checked too and it passed. This may rule out the mass air sensor being dirty/faulty.

I've been searching and searching.... Injectors and mass air sensor seem to be the next logical problem(s). I want to start with the simpler one which would be the mass air sensor. I will buy electrical connection cleaner and try cleaning the sensor tomorrow. After changing the fuel...

Bump.... Anyone have a stock, front driver-side door speaker they wanna sell?

.....thanks, I'll go and clean the mass air sensor now. I also forgot to mention the fuel filter was also replaced last week by me. Can I use brake cleaner to clean the mass air sensor connectors?

Before when it was on, it singled out 1, 3, and 8.