Recent content by cpgoodman

I won the tuner on ebay! Anybody still have torries contact information so i can get some tunes?

I'll take the tuner, still available?

Its a little under a cube so i loaded up on some poly-fill. Boston recommends a cube for that 12.

Here's what i did. Had plans to do this since i bought the car in 04 and i finally got around to it this fall. Boston G2 12 and Boston mono block totally out of the way. Im having a floor mat made for the trunk that looks like the interior mats. Should tie it together nice.

I have a brand new unopened YW4Z-5421819-AA drivers side door handle for sale. PM me if your interested.

Answers my question. Its been so long i dont remember how its supposed to run. Thanks for all the fast reply's.

Ive been dealing with cooling issues since november. I had a cracked part in the upper coolant hose and i had to wait for the "re-engineered" hose to come out. Got that only to find my hydraulic fan pump was out too. Thanks to ODDBALL on this forum i got one for a cool $70. Got that pain in the...

Ok here is where im at. I have 12 volts to the actuator, i even put 12volts to the old one and that worked too. So i took the reservoir off again and spun the fan by had. I can get fluid to come out the big hose when i spin it counter clockwise but noting comes out when i spin it clockwise...

What should the wires to the actuator meter? I'm assuming the voltage changes with rpms but I should still get a reading when I start the car. Should the fan start spinning as soon as the car's started or is it triggered by a certain temp? Is there a way to bleed a possible air bubble in the...

yea, brand new synthetic ATF fluid just added. I drained the old stuff when i took the degas bottle off to change the actuator. The fan spins freely by hand. Wouldnt it be seized up if the fan motor where bad?

Hey would i go about checking the pressure in the system?

01 LS V6 120000 miles Im having issues with the fan not kicking on full speed. It sometimes spins real slow and sometime not at all. I replaced the actuator in it today and still no dice. Not sure where to go from here. Has anybody had to replace the fan itself? Everything i read is, its...

Ill try to make it down, i have to work till 5 but should be able to make it! Do you guys have a spot in the lot that you usually head too?

I know Max well, he has been helping me out for years! Im actually gonna see him today, he's bringing his theater projector in for servicing. My shop is a mile from Chapman Ford. While he's a great guy and resource he doesnt have much pull in there service department just the parts. So im still...

So if its a torque converter issue is there anything i can do to diagnose it? What things should i be looking for? This seems like the most likely culprit given the way it feels when you put it in gear, esp reverse. The chimming noise has to be due to the battery, ill run it for awhile and...