Lincoln Mark VIII

  1. Plugs & Coils R & R

    My 97 MK VIII has 84K miles and reading up on the plugs issues on these aluminum heads has put this all in motion. Back in my youth, pulling...
    Rating:
    0/5,
    Views:
    192
    Likes:
    0
  2. Part 2 Ultimate blend door repair FINALY 8/22/20

    **** UPDATE*** Well folks the earlier Ultimate blender repair article on making the repair & mod of the black broken arm is nearly all but...
    Rating:
    0/5,
    Views:
    642
    Likes:
    0
  3. How to make 9005 Bulb adapters 4 Low Beam conversion

    My OEM Low beams craped out with 82K on the car so I was pressed into rigging in a 9005 Hi beam kit. I choose the 9005 at 5000K since I hate the...
    Rating:
    5/5,
    Views:
    546
    Likes:
    1
  4. Power Door Lock Actuator R&R

    This can be a real head scratcher if you don't do a bunch of searching and even then the You Tube vid on this off model repair misses some points....
    Rating:
    5/5,
    Views:
    449
    Likes:
    0
  5. Cruise Control switch recall DIY fix

    Heres another one of those illusive internet fixes that isn't to easy to find info on. The original problem is that the cruise control is turned...
    Rating:
    5/5,
    Views:
    516
    Likes:
    0
  6. True Benz 2.5" SS Exhaust build & fab a down pipe hanger (UPDATE)

    Finaly got this project finished! All from a creeper no less.... Well I have to agree with Capt Fast since he said if to do again, do the 2.25"...
    Rating:
    5/5,
    Views:
    1K
    Likes:
    0
  7. G2 Trunk florecent mod to 1157's and Repair snaped off housing mounting studs

    This 1157 mod is a mod that would need a Lathe application. I started out with a 2005 Mustang 6 - 1157 socket sequential harness with 2 marker...
    Rating:
    0/5,
    Views:
    1.2K
    Likes:
    0
  8. DERALE oil filter relocation kit project

    Probably the most disliked thing about changing the oil filter on my 97 is the fact that you have to spin it on dry. As every one knows, cold...
    Rating:
    0/5,
    Views:
    1K
    Likes:
    1
  9. Dash mounted Radar / delete suction cups & spring cord

    This is for the fabricators out there that can handle a little welding, drilling and wiring. The design of the Mark VIII dash board is about as...
    Rating:
    0/5,
    Views:
    873
    Likes:
    0
  10. Mod your Gen 2 Ash Tray for a quick cell phone perch.

    Now I know there all sorts of do dads made for holding a cell phone in a car but who likes that grabber sticking out in a never perfect dash...
    Rating:
    0/5,
    Views:
    1.1K
    Likes:
    0
  11. Repairing a rotten lower Thermostat Housing

    These old car do not lac for surprise repairs! While in the process of swapping in an all aluminum Radiator, I thought I would check on the...
    Rating:
    5/5,
    Views:
    999
    Likes:
    1
  12. Easy Fix for loose Air Vent Dials & vent foam repair

    To some this may sound petty, but engineers spend a lot of time on giving a car a "feel" to the controls. As all of you know, the resistance on...
    Rating:
    0/5,
    Views:
    841
    Likes:
    0
  13. Best way to LED your Door entry light.

    As a new Mark VIII owner, I'm coming to realize PVC cement & 3m emblem tape are both key items to hold these cars together! The plastic on my FL...
    Rating:
    0/5,
    Views:
    913
    Likes:
    1
  14. Ultimate Blend Door repair & modification / * UPDATE *

    Being a trained Gunsmith, rule #1 is before you can fix any thing, you need to know exactly how it was designed to work and why it failed. That's...
    Rating:
    0/5,
    Views:
    1.6K
    Likes:
    0
  15. Monroe MA815 Max Air shocks for your rear coil spring swap in.

    I did a novel rear shock install with my coil spring conversion. I wanted the ability to raise the rear a bit if need be or like some, might want...
    Rating:
    0/5,
    Views:
    1.4K
    Likes:
    0
Loading...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.