Lincoln LS

  1. How Make Custom Lincoln Star Emblems

    Remove adhesive from back. Finger nail or flathead screw driver works good. 400 grit sandpaper to sand off black backing. Tape off edges and...
    Rating:
    0/5,
    Views:
    1.2K
    Likes:
    0
  2. Modifying Stock Speakers

    Modifying stock speakers for better sound and clarity.Remove back cover.[ATTACH]Cut white & black wire at circuit board.[ATTACH]Remove...
    Rating:
    0/5,
    Views:
    1.1K
    Likes:
    0
  3. Add LED V-Signals in your Lincoln LS Mirrors

    [IMG]By: Quik LSExcerpts from Taurus Club of AmericaI purchased : - 12,000mcd RED LEDs off e-bay (100 LEDs for $18) - 560ohm resisters from...
    Rating:
    0/5,
    Views:
    944
    Likes:
    0
  4. A-Pillar Guage Pod Install in the Lincoln LS

    By LVC Member Quik LS [ATTACH]I finally installed my A-Pillar and gauges last weekend.I installed AutoMeter C2 Fuel Pressure and Air/Ratio...
    Rating:
    0/5,
    Views:
    826
    Likes:
    0
  5. Stainless Steel Brake line Installation in the Lincoln LS

    By LVC Member Quik LS[ATTACH]I installed the StopTech Stainless Steel Brake Lines today.[ATTACH]As you know, I autocross twice a...
    Rating:
    0/5,
    Views:
    1K
    Likes:
    0
  6. Modifying the Lincoln LS Air box

    [ATTACH]Here is a little Lincoln Tech article for you. The general idea here is to get more air into the engine thereby increasing efficiency...
    Rating:
    0/5,
    Views:
    1.4K
    Likes:
    1
  7. Replacing the stereo and speakers in your 2000 - 2003 Lincoln LS

    Submitted by Pepsi2185 [ATTACH]Safety Exercise caution when working around electronics and unless you are well versed in automotive...
    Rating:
    0/5,
    Views:
    1.4K
    Likes:
    1
  8. Valve Cover Seal Inspection and Replacement For the Lincoln LS

    By LSBIT[ATTACH]This is a time consuming job, but can be done with basic hand tools. It's just a matter of using the tools in the right...
    Rating:
    0/5,
    Views:
    1.9K
    Likes:
    0
  9. Installing Brake Rotor Vents on the Lincoln LS

    By: QuickLS[ATTACH]I added some brake ducts to my LS - intakes from the lower front grill - through tubing - into the wheel spindles. This...
    Rating:
    0/5,
    Views:
    918
    Likes:
    0
  10. V6 Lincoln LS Coil On Plug Replacement

    Submitted by: Quik LS[ATTACH]Replacing the COPs (coil-on-plug) is an all to common occurrence on early model Lincoln LS. the Valve covers...
    Rating:
    0/5,
    Views:
    984
    Likes:
    0
  11. Replacing the Spark Plugs in the V6 Lincoln LS 3.0l

    Submitted by: Quik LS[ATTACH]Replacing spark plugs on the V8 is easy to do but requires working in a tight space, while the V6 is a little...
    Rating:
    0/5,
    Views:
    805
    Likes:
    0
  12. Replacing the Spark Plugs in the V8 Lincoln LS 3.9L

    Submitted by: Quik LSReplacing spark plugs on the V8 is easy to do but requires working in a tight space, while the V6 is a little more involved...
    Rating:
    0/5,
    Views:
    1.3K
    Likes:
    0
  13. Replace the V8 Lincoln LS Intake Manifold

    Submitted by: Quik LSA little more involved, removing the V8 intake requires draining the cooling system and removing the Air Cleaner Outlet...
    Rating:
    0/5,
    Views:
    1.2K
    Likes:
    0
  14. V8 Lincoln LS Coil On Plug Replacement

    Submitted by: Quik LSReplacing the COPs (coil-on-plug) is an all to common occurrence on early model Lincoln LS. the Valve covers tended to leak...
    Rating:
    0/5,
    Views:
    902
    Likes:
    0
  15. Replace the V6 Lincoln LS Intake Manifold

    Submitted by: Quik LSYou must remove the V6 intake when changing spark plugs, replacing coils or replacing the PCV valve.Intake Manifold...
    Rating:
    0/5,
    Views:
    1.1K
    Likes:
    0
Loading...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.