Articles by StealthV

StealthV
6 min read
Views
2,143
Submitted by: StealthV Variable-assist power steering A power steering system that uses valves and speed sensors to vary the amount of steering assist according to engine or road speed. At slow speeds more steering assist is delivered and steering the wheels is easier; necessary for parking...
StealthV
3 min read
Views
3,099
Submitted by StealthV Items Required: -- Four quarts of Dextron III Automatic Transmission Fluid (for mine I used Mobil1 ATF). -- Fluid pump (make sure the threads are big enough for the Mobil1 bottle) or a suction gun would also work well -- Oil drain pan -- Set of Rhino ramps (preferable) or...
StealthV
1 min read
Views
1,809
Submitted By: Stealth V Tire options Lots of snow tire options in 245/45/18: Bridgestone Blizzak LM-22 Continental ContiWinterContact TS790 V Dunlop Winter Sport M3 Michelin Pilot Alpin PA2 Pirelli Winter 240 SnowSport Fuel treatment For winter storage, recommend adding Sta-bil to...
StealthV
2 min read
Views
2,686
Submitted by: StealthV Items Required: -- Two quarts of GM Synthetic Axle Lubricant SAE 75W-90 GM #12378261 (~$27/quart) -- One 4 oz. bottle of Limited Slip Axle Lubricant Additive GM #1052358 -- One 10-mm hex allen wrench -- Suction gun -- Oil drain pan -- Set of ramps or jack stands and a...
StealthV
3 min read
Views
2,335
Submitted by: StealthV Use this as a pictorial reference only; always refer to the official B&B instructions for more detail or clarification. For more information, please visit B&B Performance Exhaust Installation time: Approximately one hour with one person. Items/tools needed: 1 set...
StealthV
4 min read
Views
2,877
Submitted by: StealthV Use this as a pictorial reference only; always refer to the official B&B Performance Exhaust instructions for more detail or clarification. For more information, please visit B&B Performance Exhaust Installation time: Approximately two leisurely hours with one...
StealthV
1 min read
Views
1,771
Changing a 3" Race X-Pipe Cat-Back To a Resonator Style for the Cadillac CTS-V Submitted by: StealthV Step 1. Safely raise and support the Cadillac CTS V. Step 2. Underneath the driver's side of the transmission, locate the CAGS harness which is near the "Use Dextron III ATF Only"...
StealthV
1 min read
Views
1,919
Submitted by: StealthV Step 1. Safely raise and support the Cadillac CTS V. Step 2. Underneath the driver's side of the transmission, locate the CAGS harness which is near the "Use Dextron III ATF Only" orange sticker. The factory CAGS harness has two wires - one is gray and the other is...
StealthV
2 min read
Views
3,521
Submitted By: StealthV Caution - the LS6 engine and cover can be very hot! Allow the engine to cool to ambient temperature before performing the cover installation. 1. Use a 18-mm socket on an extension with a ratchet to remove the four bolts circled in green that attach the strut tower...
Back
Top