![]() |
![]() |
|
||||
EGR Valve Tube -3.9L Removal and Installation 1. Disconnect the battery ground cable. 2. Remove the cabin air filter. 3. Disconnect the exhaust gas recirculation (EGR) tube from the exhaust manifold. · Loosen the compression nut. 4. Disconnect the differential pressure feedback EGR (DPFE) hoses. 5. Disconnect the DPFE electrical connector. 6. Disconnect the EGR tube from the EGR valve. · Loosen the compression nut. 7. Disconnect the accelerator and speed control cables. 8. Position the wire harness bracket aside. · Remove the nuts. 9. Position the bracket aside. · Remove the bolts. 10. Remove the EGR tube from the vehicle. 11. To install, reverse the removal procedure.
|
||||
This area is intended for Tech Tips submitted by members of LincolnvsCadillac.com. The opinions expressed here are the opinions of the individual author and do not necessarily represent the views of LincolnvsCadillac.com. Undertake these procedures at your own risk. If you have any comments or questions please contact the individual authors. Reader assumes all the risk associated with the installation of aftermarket products. LincolnvsCadillac.com and its owners are not responsible for any direct or indirect damage to the vehicle, person or persons and the resulting costs incurred from the installation or use of these products. LincolnvsCadillac.com recognizes that "Cadillac" and "Chevrolet" and their respective logos, model names and numbers are registered trademarks of the General Motors Corporation. These and other terms used on this website are used for identification purposes only. Lincolnvscadillac.com is not affiliated in any way with the General Motors Corporation, Cadillac, Chevrolet, Mobil or any other website or company listed herein. |
||||
![]() |
![]() |
![]() |
![]() |