I find it weird that everyone doesn't like the fluid mounts. I'm finally changing the original one and I have 186k on my car. Weird part is its loose intermittently...
I have a 94 Mark VIII and the drivers side motor mount, and trans mount are pretty much shot. I get an intermittent thud when I leave a light under moderate acceleration. I called the dealer the original Hydraulic mounts are no longer availible, and I've tried Anchor mounts in the past and they...
If you pull the trans dont bother dropping the gas tank.... Its a huge pain in the ass and you dont have to. Mark where the yoke meets the drive shaft so you can put it back the same way. Then go in the back and crack all the bolts that go from the drive shaft to the rear end loose, now go in...
I forgot but isnt there a check valve or something on the sending unit in the tank that the pump would attach to? I have a brand new pump also and the same problem but mine takes a a couple hours to bleed down to about 28psi and I end up with a long crank before starting. But if I cycle the key...
You could try cleaning them and the tone ring, in case you're lucky and its just dirty. Use brake clean and a brass brush to clean up the tone rings and look for cracks, you can use a thin lint free rag and brake clean to clean the sensor itself. I eventually got a used some from a guy whose...
Ive never had to change the sway bar bushing on a Mark, am I just buying a regular 1 1/4 sway bar bushing? Or are they a specialty one like in the rear? Also do they still use the factory Ford links? Mine are brand new..
For about the same price you can get the Westar front Air Struts at Autozone For 175 each, they come with the solenoids installed and they have a lifetime warranty. I replaced all 4 bags and the compressor on my 94 Mark VIII and Ive had no trouble at all with them. My car is daily driven and...
Im paying someone to replace my sub frame on my Mark VIII the repeated failure of Moog Strut Rod Bushings has actually beat the hell out of it and also changed the shape of the hole they sit in. So needless to say I will be buying the $200 strut rod kit with Ford parts and Stainless sleeves...
My dad had a BMW that gave me a hard time getting the old spark plugs out. I didnt know that on an aluminum head tightening and loosening the spark plug over and over to get it out can damage the threads. So a week later he had a spark plug fly right out of it. I ran a spark plug tap through the...
I have a 94 Mark Viii, and unfortunately I hit a big curb the other night I didn't see. The front end was new and even had new Ford strut rod Bushings and the stainless sleeves... The guy who attempted to fix it said the bushings collapsed on the passenger side, so he replaced it with Moog...
I didnt notice it last night, but I see it now. Your bolts go in through the front, when I took apart the other car the drivers side went from the front but the passenger side went front the back. The only reason I remember it was the disaster the passenger side was to remove and the fact that I...
I didnt notice the part about how you got the through bolts out. I gotta say though I like your engine support.
Im looking for a trick to get the bolt that holds the motor mount to the subframe out. I actually have the E18 socket still for removing the the subframe itself. But I remember the...
I have a 94 Mark VIII and I want to drop the subframe to replace my oil pan gasket and drivers side exhaust manifold. I put a Motor in a Mark VIII years ago, and I remember having the car sitting in my yard forever because I couldnt get the through bolts on the motor mounts out laying on my back...
I think guys misunderstood me you can get real front air struts not a spring conversion from autozone using a 20 or 25% coupon they send you by email once a month for 175 each and they come with the solenoid and have a life time warranty... Its probably the best buy you can get...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.