BobLS's latest activity
-
BobLS replied to the thread Charging System Question.Happy to say the LS hasn't seen any rust. I've had good luck with shca ofc wire, I'm not sure how good it really is, but I know it isn't... -
Both batteries need to be grounded to the body very well. The engine then needs to be grounded to the body very well. The alternators...
-
BobLS replied to the thread Charging System Question.Also, I can't do anything with the alternator on my X4, but, the Advantage III software might have that functionality.
-
BobLS replied to the thread Charging System Question.This is the answer I've been looking for, thank you. I plan on adding 1/0 grounds for everything, would you recommend grounding both...
-
I didn't catch that you wanted it to be a separate system. Yeah, it's possible for the ground to get noisy and the PCM to get upset by...
-
BobLS replied to the thread Charging System Question.Oddball, doing a little more reading into your comment (now that I'm not at work) I think you've more/less answered my question. Do you...
-
BobLS replied to the thread Charging System Question.It's gonna be used for a mix of things, yes a little spl stuff, but also my cooling fan controller, air pump for my d2 coilovers...
-
Several of us tried "high output" aftermarket alternators in years past with very limited success - mostly failure. The control in the...
-
BobLS replied to the thread Charging System Question.Oddball, I appreciate the reply, what I'm trying to do is bypass the factory alt for my aftermarket electronics. I'd leave the factory...
-
BobLS replied to the thread Charging System Question.I've kinda put this aside for now while I work on some other not so daunting things. I think I've decided I'm just going to give it a...
-
BobLS replied to the thread Charging System Question.I'm going to add another battery, I was more trying to figure out if I could rig up an internally regulated one wire to create a...
