MarkOfDeath
May 31st, 2004, 10:17 PM
It was an easy job, I just unpluged the Cig lighter fuse its number 8 by the way. You just plug the postive wire in and then ground the negative wire, then you should be done and reading 12 to 12.6 volts and 14.3 when the car is running.
First Start be prying of the A-pillar, you will have to unplug some wires if you have the factory car phone
http://images.cardomain.com/member_images/4/web/376000-376999/376171_160_full.jpg
Next you want to drill a hole in the pillar to allow the wires to slide throw
http://images.cardomain.com/member_images/4/web/376000-376999/376171_161_full.jpg
Now you have to run the wire which is easy just push it throw the top corner by the vent, now you have to have a plug to attach to the wire.
http://images.cardomain.com/member_images/4/web/376000-376999/376171_171_full.jpg
Now repeat, this time do it with the negative wire and ground it at one of the copper bolts, after that push the wires through the hole in the A-pillar
http://images.cardomain.com/member_images/4/web/376000-376999/376171_172_full.jpg
Now clip the A-piller back on with the wires through
http://images.cardomain.com/member_images/4/web/376000-376999/376171_163_full.jpg
Now attach the Pod and pull the wires through like so
http://images.cardomain.com/member_images/4/web/376000-376999/376171_164_full.jpg
When your done with the top wiring you should then plug int he positive wire into the fuse socket 8
http://images.cardomain.com/member_images/4/web/376000-376999/376171_162_full.jpg
When you finish you should be reading 12 volts
http://images.cardomain.com/member_images/4/web/376000-376999/376171_165_full.jpg
:give
First Start be prying of the A-pillar, you will have to unplug some wires if you have the factory car phone
http://images.cardomain.com/member_images/4/web/376000-376999/376171_160_full.jpg
Next you want to drill a hole in the pillar to allow the wires to slide throw
http://images.cardomain.com/member_images/4/web/376000-376999/376171_161_full.jpg
Now you have to run the wire which is easy just push it throw the top corner by the vent, now you have to have a plug to attach to the wire.
http://images.cardomain.com/member_images/4/web/376000-376999/376171_171_full.jpg
Now repeat, this time do it with the negative wire and ground it at one of the copper bolts, after that push the wires through the hole in the A-pillar
http://images.cardomain.com/member_images/4/web/376000-376999/376171_172_full.jpg
Now clip the A-piller back on with the wires through
http://images.cardomain.com/member_images/4/web/376000-376999/376171_163_full.jpg
Now attach the Pod and pull the wires through like so
http://images.cardomain.com/member_images/4/web/376000-376999/376171_164_full.jpg
When your done with the top wiring you should then plug int he positive wire into the fuse socket 8
http://images.cardomain.com/member_images/4/web/376000-376999/376171_162_full.jpg
When you finish you should be reading 12 volts
http://images.cardomain.com/member_images/4/web/376000-376999/376171_165_full.jpg
:give

