any of you guys ever put poly bushings in the control arms im looking to do it

If you go on a 'googling trip' for poly bushings, you'll find that they are available in a bewildering variety based on measurements. You need to first measure existing bushings, or at least discover OD, ID, and length needed. If you then approach the manufacturers/owners of the selected website, you'll be able to order what you need.

KS

yea thanks i run a shop here in long island for exotic cars and my guy gave me the idea. thanks for your help

I think they are the same as the one's for the Jaguars. You might be able to cross-ref here (http://www.jaguarforum.co.uk/viewtopic.php?f=16&t=34593). Hope this helps.:D

Whenever you find them, please post it up! Pics a big +

no problem i haven found anything yet

See thread in general LS area. (November 10)

KS

did not find it

What I said there was that I found a potential source for steel-shell poly bushings in a fair variety of sizes. Since they are for another purpose, if you can give me dimensions for the LS I can see how close I can come.

KS