ONEBADMK8
March 20th, 2005, 08:08 PM
Thats right. There back too!
http://www.lincolnmotorsport.com/newassassins.jpg
This is the Lincolnmotorsport (http://www.lincolnmotorsport.com/) Assassin Eliminator. THE NAME SAYS IT ALL ! This is as hardcore as modular mufflers can get.
You cannot hide your power with these ! Outside this muffler is a
mirror chrome polished rock solid seamless one piece stainless steel body with
NO lap joints or welded sections. Inside its a single one piece stainless steel
perforated chamber straight through design with a dense ceramic and fiberglass packing
surround. This filters out the "HARSH" exhaust harmonics which also
provides reasonable drone control with an aggressive rich "unrestricted"
exhaust tone that is "second to none". Our Ultra High Flow design is
capable of 550 cfm because of no sharp turns, baffles or "deflectors" ,
just an un-obstructed HIGH SPEED straight run for your engine to exhale
through. Although this muffler was purpouse built for highly modified 32v
engines it will function on all modular powerplants however on higher gear
equipped vehicles the Lincolnmotorsport (http://www.lincolnmotorsport.com/) Twin XX-Pipe Torque chamber is highly suggested.
This muffler is offered in a 2.5 inch neck and comes
with Lincolnmotorsport (http://www.lincolnmotorsport.com/) BULLDAWG 4.0 inch slanted tips.
$129.00 each less s&h.
http://www.lincolnmotorsport.com/newassassins.jpg
This is the Lincolnmotorsport (http://www.lincolnmotorsport.com/) Assassin Eliminator. THE NAME SAYS IT ALL ! This is as hardcore as modular mufflers can get.
You cannot hide your power with these ! Outside this muffler is a
mirror chrome polished rock solid seamless one piece stainless steel body with
NO lap joints or welded sections. Inside its a single one piece stainless steel
perforated chamber straight through design with a dense ceramic and fiberglass packing
surround. This filters out the "HARSH" exhaust harmonics which also
provides reasonable drone control with an aggressive rich "unrestricted"
exhaust tone that is "second to none". Our Ultra High Flow design is
capable of 550 cfm because of no sharp turns, baffles or "deflectors" ,
just an un-obstructed HIGH SPEED straight run for your engine to exhale
through. Although this muffler was purpouse built for highly modified 32v
engines it will function on all modular powerplants however on higher gear
equipped vehicles the Lincolnmotorsport (http://www.lincolnmotorsport.com/) Twin XX-Pipe Torque chamber is highly suggested.
This muffler is offered in a 2.5 inch neck and comes
with Lincolnmotorsport (http://www.lincolnmotorsport.com/) BULLDAWG 4.0 inch slanted tips.
$129.00 each less s&h.

