I'm looking for the plastic liner for the passenger side wheel well. I noticed mine was cracked with a large chunk missing out of it today along with a bent rim (wife doesnt know what happened and never noticed the shake in the wheel), I've checked some of the local parts yards with no luck. any idea where I could find it?
I'm doing the entire front suspension now and would like to get it replaced.
I'm also looking for a decent set of wheels if anyone has any for sale, looks like the custom wheel shop web site only has one wheel listed now. super coupe performance has a nice set of saleen stars but are $219 each.
found a set of borbarts on ebay at a really good price but they have significant rash.

www.car-part.com

find a junkyard with a good fender. typically the liner is sold with the fender, but im sure someone would be willing to help you out.

Thanks K9t8m

LaserSVT is parting out a 97 LSC. I am sure he has what you need. What kind of wheel do you need?

I pm'd laser earlirer, his wheel well liner is cracked. Didn't ask about the wheels. I have 10 spokes and it looks like I have one bent one on the pass side front for sure.... I'll have to check the rear.

I pm'd laser earlirer, his wheel well liner is cracked. Didn't ask about the wheels. I have 10 spokes and it looks like I have one bent one on the pass side front for sure.... I'll have to check the rear.

Where's forest lake? I have some 10 spokes chillin'.

If you want nice aftermarket, wait til Brad (the custom wheel shop) gets his next run of wheels done. They should be in the process right now. Any 89-97 t-bird wheel will bolt on too, if you just want to find a cheap one to hold you over til you find a nice set. Finding nice stuff for these cars takes patience.

Forest Lake MN?

Forest Lake MN?

+1
I have a set of octastars I might be talked into selling.

Damn Kirk... I want those wheels... SOOO clean...

And I too still have some rash/peal free 10 spokes with Michelins on em. :)

Sorry about the liner though.

+1
I have a set of octastars I might be talked into selling.


Sure would like one of those rims nut! Mine were near mint, especially the three that didn't get black in the fire. All center caps had no scratches in them either. Now I have a black wheel and a cap missing lol. I'm not sure if I even want the Octi's on the white car or not. Can't make my mind up.

Yup, forest lake MN. I see your sig says north branch, not to far if thats MN.
I'm thinking I really ant those 18" saleens, the more I look at Lasers car the better it looks.

Sure would like one of those rims nut! Mine were near mint, especially the three that didn't get black in the fire. All center caps had no scratches in them either. Now I have a black wheel and a cap missing lol. I'm not sure if I even want the Octi's on the white car or not. Can't make my mind up.

I am sure you would :)
Have you checked local junk yards?
Maybe you can find one.

Yup, forest lake MN. I see your sig says north branch, not to far if thats MN.
I'm thinking I really ant those 18" saleens, the more I look at Lasers car the better it looks.

Great! another local mark owner.
Lasers car is nice, I think those saleens from Brad "baggedtaco"

http://www.lincolnvscadillac.com/member.php?u=7197

http://www.thecustomwheelshop.com/

I'm thinking I really ant those 18" saleens, the more I look at Lasers car the better it looks.

Lol. I should've posted those wheels fs earlier maybe!!

Ya if you want a set you'd have to wait for Brad to do another run.

I'm thinking I really ant those 18" saleens, the more I look at Lasers car the better it looks.

:)

Another MN guy!!!

He needs to go through initiation...... :)
A good detail would do it.

money money money

I just ordered all of the parts to rebuild my front end this morning, next.... new shoes!

Here is the toy I sold to buy my Mark. http://www.flickr.com/photos/22636278@N05/2182046556/in/set-72157603677017230/

I ordered all of my front end parts this morning, next..... new shoes!
here is the toy I sold to buy my Mark http://www.flickr.com/photos/22636278@N05/2182046556/in/set-72157603677017230/

He needs to go through initiation...... :)
A good detail would do it.

Everyone can use a good detail :D

I ordered all of my front end parts this morning, next..... new shoes!
here is the toy I sold to buy my Mark http://www.flickr.com/photos/22636278@N05/2182046556/in/set-72157603677017230/

ooooOOOooooOooooo

http://farm3.static.flickr.com/2151/2182046556_775f75804a.jpg


Is that a Bugeye Sprite in the background???? :cool:

I had a MG midget.....like a go cart for the street.



Were are the :GotPics: of the mark!!!!!!

I had a MG midget.....like a go cart for the street.


Sorry to hear.

What happened to it? Fall apart from rust? :lol:

That is my 1960 MGA in the background, 2.3L ford motor with a 5 speed. 65 Goat is in the garage.

I'll pic's of the Mark up as soon as I can.

I ordered all of my front end parts this morning, next..... new shoes!
here is the toy I sold to buy my Mark http://www.flickr.com/photos/22636278@N05/2182046556/in/set-72157603677017230/

But why!! You could've just bought a mark, and kept it! Reverse it, and let me go buy a different mark to trade you! :D

Sorry to hear.

What happened to it? Fall apart from rust? :lol:
Nope....sold it in 84
The car was a POS. :) dam brits.
It would eat points for no good reason and you never knew when.
I used to keep a distribtor in the glove box with new points, you could swap them without changing timing.
Converted it to eletronic.
The dam SU carbs sucked always getting out of sync.
First gear Syncros eating $hit, overheating warping the head.
Eating head gaskets...clutches...I dont miss it.

That is my 1960 MGA in the background, 2.3L ford motor with a 5 speed. 65 Goat is in the garage.
I was kicking that around when I had the MG.
The aftermarket for 2.3 is insane.
I would love to see that car....sounds like a blast!
And a Goat....sounds cool.
Goat pics?????

Everyone can use a good detail :D

That is very true. All the shops here suck. I stopped at a few places thinking it would be worth spending $125-$150 and save myself that 6-7 hours worth of work. Well for $170 (most places were same cost) they will wash it, shampoo it and wax it. Thats not a freaking detail! I even tell the guy (who is Mexican and can barley understand) that I want it clayed, de-swirled, waxed, buffed.... what a freakin detail actually is. I get a blank stare and "Ju won me to use dirt .... eh clay on jur car?" :eek: Yeah, no.

Fugg it, weekend after next I will detail it myself when it gets back from the body shop.

The 2.3 makes it quite quick, it weighs in at 2090lbs with me in it. I'll get all the pic's up as soon as I can. I was thinking a Mark viii motor in the MG but it just to wide! a 5.0 will fit quite nice though.
The Mini was a blast, factory it put out about 46hp. after all the work she ran about 113hp. still not practical on highways in the US.

Gotta love those mexicans. There's so much illegal work going on in Texas, that's the one thing I can't stand. The last time I was an 'employee' I quit when my boss told me I had to hire a couple guys he had working with us for 10/hr, that didn't speak english. I just don't have the f'g patience to use my hands and arms as my mouth.

Lol... I've worked with plenty of them in the golf course industry...