|
|||||
Pacesetter headersdanny_holtermann December 19th, 2009, 11:45 PM has anyone even tried using pacesetter header? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190356274850&fromMakeTrack=true Just skeptical. jrherald420 December 20th, 2009, 12:10 AM From what i know those wont work. Kooks makes the only headers i know of that will fit Mark 8's. Staffamerica74 December 20th, 2009, 10:56 AM Offtopic... I have pacesetters on my bronco.... uncoated.... Ill never go uncoated again. Ontopic... Yeah I dont think they work on a mark tho. kustomizingkid December 20th, 2009, 01:32 PM Junk... everything pacesetter makes is junk... danny_holtermann December 20th, 2009, 01:34 PM Why is it that kooks is the only kind that works, is it the width of the motor bay, or is it the down drop? kustomizingkid December 20th, 2009, 01:40 PM Why is it that kooks is the only kind that works, is it the width of the motor bay, or is it the down drop? Its because they were made for the car, not a Mustang... the Marks have very tight clearance for headers so to make them fit they had to be built around the car.... DLF December 20th, 2009, 02:04 PM The DOHC is also a very tight fit in a Mustang. The biggest problem fitting headers to the MN-12/FN-10 chassis is the steering shaft location. And then there's the issue of the Mark VIII specific smog fittings. But, the Kid's right, not much room under here. jrherald420 December 20th, 2009, 02:31 PM Damn thats a tight fit!!!! Well worth the 500.00 price tag most of the shops around me charge for the install. LaserSVT December 20th, 2009, 06:50 PM Looking at those pics just made me decide I will never have headers on my Mark. Even if I was swapping the motor I would be very hesitant. Thats so close that I bet there are occasional rattles fron the times the engine twists. Id rather get a blower. :D kustomizingkid December 20th, 2009, 06:53 PM Sissy.... who cares about a few rattles... LaserSVT December 20th, 2009, 07:07 PM Sissy.... who cares about a few rattles... *raises hand* danny_holtermann December 20th, 2009, 07:58 PM HOLY :q:q:q:q THAT IS SUPER TIGHT, right up against the frame. what exactly is the smog thing your talking about dlf, what headers are those, the kooks shorty ? CobraStar_LS8 December 20th, 2009, 08:03 PM can a Navigator exhaust manifold fit our Marks???...I have a set and they look to have better flow than our stock manifold DLF December 20th, 2009, 09:30 PM Looking at those pics just made me decide I will never have headers on my Mark. Even if I was swapping the motor I would be very hesitant. Thats so close that I bet there are occasional rattles fron the times the engine twists. Id rather get a blower. :D With the solid rubber engine mounts I installed, I have had no such problems. DLF December 20th, 2009, 09:32 PM HOLY :q:q:q:q THAT IS SUPER TIGHT, right up against the frame. what exactly is the smog thing your talking about dlf, what headers are those, the kooks shorty ? They are Stainless Steel Kook's 3/4 Headers. The EGR fitting and the AIR fittings are different than the 96-98 Cobra's. driller December 20th, 2009, 11:30 PM can a Navigator exhaust manifold fit our Marks???...I have a set and they look to have better flow than our stock manifold I don't think so, the Navi is a 5.4L. But '03-'04 Cobra manifolds do fit with modification to the steering shaft. kustomizingkid December 21st, 2009, 12:49 AM I am going to put some 01 Cobra manifolds on next spring... ford nut December 21st, 2009, 11:00 AM I am going to put some 01 Cobra manifolds on next spring... humm Want a car to practice on? :D kustomizingkid December 21st, 2009, 11:23 AM Sure :D | |||||
|
Classic Mopar Forum - Mopar - Speed Trap |
|||||
EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum
