i just finished up my swap from 94 to 98 tranny.. 98 wiring harness wouldent work so i used my old harness... but im having a problem.. its shifting very high when i punch it.. at like 6.5-7k and when im driving slow it still shifts igh at about 3.5-4k.. is there something i have to do to make it shift better? Thanks for any help/ comments

That's because you need to re-pin the harness.

And before you ask "well.. how in hell do I do that? What goes where?"

Click on my signature link. You will find the information you need.

HAHAHAHAHA.... Kracker just did a FULL write up on this...

That's like the BEST write up EVER!!!!

went to krackers write up.. but the page is down

http://www.p71interceptor.com/tranny/diagrams/electrical/external/bulkhead/index.html

found this would this work? im assuming i just repin to the 98 right? or is it more complicated?

http://www.p71interceptor.com/tranny/diagrams/electrical/external/bulkhead/index.html

so will this diagram work..? is that all i have to do ?!

i just finished re-pin.. and now when in any gear it shakles bad and the o/d light flashes.?! now what did i mess up on...

You must have repinned it wrong. Check your repins.

i just finished up my swap from 94 to 98 tranny.. 98 wiring harness wouldent work so i used my old harness...

The internal harness?

That diagram is spot on...

Sorry the page i had it on went down i will try ro have it up tommorrow i can send you a file transfer msg me your email

templink all the pictures are not one it yet i am working on it for you

http://docs.google.com/Doc?id=dmjx27n_5g6brvjd2

Sorry the page i had it on went down i will try ro have it up tommorrow i can send you a file transfer msg me your email

ok the site is back up i put it on my home page sorry guys

http://sites.google.com/site/krackerskrazy8s/KrackersKrazy8s/94-to-98-lincoln-mark-viii-8-transmission-swap