Who besides me would like 1 of these on the cheap ???????? Perhaps w/ this thread I'll get a response

What's cheap? Will it make my car faster? :D

What's cheap? Will it make my car faster? :D

It will make it look faster ! . LoL, I get soo many compliments out here in Chicago from it. I'm very pleased. :Beer

Who besides me would like 1 of these on the cheap ???????? Perhaps w/ this thread I'll get a response


Cheap?? how dis? :Beer

What's cheap? Will it make my car faster? :D


You'd be amazed how much faster.................zoommmmmmmmmmmmmm

As I said in a previous thread I'd like to talk to a fiberglass fabricator & propose that he make these hoods, if he thought it might be worth his while I think he'd considerate it. What I'm asking is, how many guys in here would like 1 of these hoods & if I can talk the fabricator into making them who would be willing to send this person a deposit. It would have to be enough guys that would warrant him to make prototype. Simple !!!

I'm in...stra dog's car kicks ASS! I have the same car, and have always loved the R hood...after seeing it on his car...I MUST have one.

I might have a source though...I'll check into it, and get back to you.

I'm in...stra dog's car kicks ASS! I have the same car, and have always loved the R hood...after seeing it on his car...I MUST have one.

I might have a source though...I'll check into it, and get back to you.


Thanks Craig

I'm thinkin' it costs $500-$600.

Everything seems to cost $500-$600 on my car.

4.10s = $500

Exhaust = $600

Chip/MAF/Filter = $500

MMx Driveshaft = $500

Tires = $600

Converter $600

HIDs = $500-$600

The beat goes on.... :steering

Seriously, my hood and front bumper needs painted... what better time to upgrade? It's gotta be painted anyways. See how my mind works? :Beer

I'm thinkin' it costs $500-$600.

Everything seems to cost $500-$600 on my car.

4.10s = $500

Exhaust = $600

Chip/MAF/Filter = $500

MMx Driveshaft = $500

Tires = $600

Converter $600

HIDs = $500-$600

The beat goes on.... :steering

Seriously, my hood and front bumper needs painted... what better time to upgrade? It's gotta be painted anyways. See how my mind works? :Beer


I like the way you think !!!!!!!...........lol I'm the same!!

Get your glass fabricator to make the LMS wing. I am just sitting on the molds.

You'd be amazed how much faster.................zoommmmmmmmmmmmmm
Just makes it look like S H I T IF you know what Im saying. Im all for that stuff but don't mess with the lines dude the car is HOT. and there is such a thing as fixing it till it brakes. IE book shelf wings and stuff tike that. that is not what a lincoln is all about. you did not buy a MARKVIII so you could make it look like a stang. Keep it Lincoln. If it is custom made to fit then change it.

Just makes it look like S H I T IF you know what Im saying. Im all for that stuff but don't mess with the lines dude the car is HOT. and there is such a thing as fixing it till it brakes. IE book shelf wings and stuff tike that. that is not what a lincoln is all about. you did not buy a MARKVIII so you could make it look like a stang. Keep it Lincoln. If it is custom made to fit then change it.


Personally I think a wing on the Mark would be TACKY, ugh, however, the Cobra R hood would make the car look the way it performs, kinda like, OK I'm pretty, but I bite !!!!!! I think it would be a HUGH plus to its lines!!!

:bow:

Personally I think a wing on the Mark would be TACKY, ugh, however, the Cobra R hood would make the car look the way it performs, kinda like, OK I'm pretty, but I bite !!!!!! I think it would be a HUGH plus to its lines!!!

:bow:


No way maby just rase the middle but leave the lines the same. make every thing bidder it would be ok, but Pretty but bites. no way I like my cars sexy.

I guess you guys never saw the spoiler that Geno is talking about. It is not even close to being tacky. It is very classy. Just adds a lil to the back of the car......

YO!!!! Geno.....hit them off wif a few pix.... :Beer

Here are a few pix.......I could not wait....The first 2 are it just placed on the car, and the last is it 'glassed on the car....

Can you say :ricesmile no thanks ill stick to my one ass i think it looks better

:ricesmile

Can you say :ricesmile no thanks ill stick to my one ass i think it looks better

How is it rice....that is what I would like to know.....those idiotic freakin bleacher seats are rice....that is a very classy and tasteful addition the back of a Mark VIII.

To each their own I guess.......but I just do not see it, maybe I need to have it explained to me like I am 2 or something......please. :Bang

I can see why Clown thinks the lines are classy, and I agree. However, unless Clown wants to make a few payments on my ride, or help me stuff a tranny, mod the engine, or polish it...he really doesnt have a say in what I do to my car.

Clown, in some cases, form FOLLOWS function. If you are adding a Cobra intake to a Gen 1 mark VIII, you need to have a cowl hood. Either that, or hack the rear support for clearance. Or, shim the K-member to lower the engine. The Cobra R hood is a FINCTIONAL body panel...with added clearance for certain power adders.

For example, cigarette lighters dont look good stuffed into the ergonomically contoured center console area of a mark VIII...but you dont seem to mind. Black, ugly round knob, doesnt fit the design of the car, and is an eye-sore...but it powers your cell phone charger, and lights yo smoke! Form...follows...function!

Now that we got another "opinion" out of the way...I believe this thread was design to poll interest in Cobra R hoods, not bash them, and spoilers, and anything else UN-RELATED!

Thanks.

I'd like to have Geno's wing and the Cobra R hood. Yesterday I bought a used cobra R so I can go about it the old fashioned way...actually getting the "R" section cut and grafted onto my Mark's hood. A friend of mine here does some good custom work. Look around. I got this hood chipped in the front corner for $50. It's worthless to a mustang guy/gal but, it's just what I needed.
The wing is still a dream. Geno, I'm looking for someone to make it. Are you sure I couldn't throw you and extra $100 or so, to make me one??? hehehe

Those mark's with the wings are seriously nice, Especially the blue and purplish one. That wing looks super elegant and adds to the overall flow of the car's already sweeping lines. Where can I get that for my 94 mark?


also, where can I get an R hood fo my mark? :)

So Wheres The Hood Pix?????

So Wheres The Hood Pix?????

There are quite a few in other threads, but none for the Gen 2's. No one currently makes them since it is more work involved than with a Gen 1.

Here are a few of my old car, not painted, and HID's installed as well..... :Beer

everybody is talk'n about this wings, And I have fall'n in love with them. But the BIG ? is where can we get them ?


Here are a few pix.......I could not wait....The first 2 are it just placed on the car, and the last is it 'glassed on the car....

Can you say :ricesmile no thanks ill stick to my one ass i think it looks better

RICE! LMAO!

To me the factory HUMP lines of the VIII just didnt do it for me, still doesn't. The hump isnt pronounced enough, either make it a hump or not, to me it looks unfinished, much like an Infinity J30 ass end. So we had the LMS wing made, with the specific intention of looking like a factory option, which it does, DEAD ON too.
To say rice is the real joke here, take another look from other angles. Its actually very SLAMMIN!! Gives the car an amazing new look from every angle. Hell I loved it so much I had it grafted to my trunk for LIFE.

http://www.lincolnmotorsport.com/tnew1.jpg

http://www.lincolnmotorsport.com/gallery/MarkVIII/images/y2ktag4_jpg.jpg


Heres some more shots.

http://www.lincolnmotorsport.com/gallery/MarkVIII/images/myplate_jpg.jpg

http://www.lincolnmotorsport.com/gallery/MarkVIII/images/noemblems1_jpg.jpg


http://www.lincolnmotorsport.com/gallery/MarkVIII/images/trunk_jpg.jpg

http://www.lincolnmotorsport.com/press/mmnff1/

http://www.lincolnmotorsport.com/gallery/MarkVIII/images/km8c_jpg.jpg

Man, this is gettin scary......again I have to agree with Geno on this....the rear spoiler is ON POINT!!!!

Now, all we need is a 'glas guy to get the wing going again......cause I WANT ONE!!!!!!!!!!!!!!!!!!!! :Beer

Calling that spoiler "rice" though, that's insane. It's the best thing that's happened to back of one these cars. Good on ya Geno for designing it!!

I'm with you there, Ray. I want one 2!

So Geno, is there anything you can do to get this back into production... I'm a definent buyer even if it costs $400... Because that piece just sets it off like a mofo, esp. with the hood I have on it now. I have too much attention in the front and that wing would look killer in the back.

Also, Geno are you running 275's in the rear? I just want to make sure there are no clearance issues, while sensor lowered and slammed. Also how mch did those tires cost ya.. G-force KDW's are going to run me a bit high, but I got em on my 16's now and love em'.

:Beer

I'm with you there, Ray. I want one 2!

So Geno, is there anything you can do to get this back into production... I'm a definent buyer even if it costs $400... Because that piece just sets it off like a mofo, esp. with the hood I have on it now. I have too much attention in the front and that wing would look killer in the back.

Also, Geno are you running 275's in the rear? I just want to make sure there are no clearance issues, while sensor lowered and slammed. Also how mch did those tires cost ya.. G-force KDW's are going to run me a bit high, but I got em on my 16's now and love em'.

:Beer

Like I said from the get go I need a manufacturer that can construct, package and ship.

Yes I am running 275/40's on my new 18's I will be running 275/35's in the rear. I use Sumitomo Exclusively, LOVE them, wouldn't trade them for ANY over priced over rated tire out there. There AMAZING and dirt cheap. Guilt FREE burnouts!!

http://www.tirerack.com/images/tires/sumitomo/su_htrz_ii.jpg

It will make it look faster ! . LoL, I get soo many compliments out here in Chicago from it. I'm very pleased. :Beer

Is that a cold air intake opening in your passenger side of your front bumper?
If it is how did you do that?

Is that a cold air intake opening in your passenger side of your front bumper?
If it is how did you do that?

Pretty much just get a saw zawl and cut out a whole on the bumper.... LOL. I was walking around Home Depot and found that spacer/duct that is in place with the bumper. :Beer It was my stupid idea, but actually, it's different and has great functions. More cool free flowing air straight into a K&N conical filter. I still have to get a 4" aluminum tube and customize it more, but for now it serves it's purpose; more air. I'll post new pics once they are available.

Now to Geno, thanks a ton for the info... Those tires actually resemble the belly of a Cobra, LOL. Of course you were going for that , Geesh. Are you going to sell the 17's, if so, I'm game. Hit me up if you are. I wanted to go 18's in the Cobra R's but wanted a nice wide tire in back and didn't know the clearance with the 18's.

Oh, I want to use my LMS VIP card now so set aside that one LMS wing. I'll send you the billing and shipping information. :biggrin: I wish !

Yes I am running 275/40's on my new 18's I will be running 275/35's in the rear. I use Sumitomo Exclusively, LOVE them, wouldn't trade them for ANY over priced over rated tire out there. There AMAZING and dirt cheap. Guilt FREE burnouts!!

http://www.tirerack.com/images/tires/sumitomo/su_htrz_ii.jpg



Thats exactly how I feel about the Kumho's I just bought. I balk at the nay-sayers...I paid $58 per tire...(245/50-16), and I can light them up for miles, knwoing they are so darn cheap.

Oh, and they actually do pretty good in the rain.

Very similar to the Sumi's...

Nice lookin' throw-away's ey?

where do you get a hood, i want one,and i don't have anyone here to make one.

a cobra R hood is a very sound investment in my opinion.... a real head turner lol. As far as a wing tho, i want one of the flat off the back kind, like pro street or sumtin. That salt flat racer mark8 wit the rocket has the wing im talkin about.

a cobra R hood is a very sound investment in my opinion.... a real head turner lol. As far as a wing tho, i want one of the flat off the back kind, like pro street or sumtin. That salt flat racer mark8 wit the rocket has the wing im talkin about.

Your in Mt Holly, I am 20 min away in Gloucester City and have never seen your car? Thats strange. Also what does the web address say on your window, cant really make it out.

... Also what does the web address say on your window, cant really make it out.

You're gettin old Geno if you can't make that out. :waving:

Then I am old cause I can't see it.

Then I am old cause I can't see it.

My guess. WWW.LINCOLNMOTORSPORT.COM (http://www.LINCOLNMOTORSPORT.COM)

My guess. WWW.LINCOLNMOTORSPORT.COM (http://www.LINCOLNMOTORSPORT.COM)

BINGO!

BINGO!

I am freaking BLIND!! Now I can see it! DUHHHH to ME!

what companies make the cobra r , i want one!!!!!

What size tires are on the Blue Mark with the wing?

What size tires are on the Blue Mark with the wing?

The one in my signature picture?

Get your glass fabricator to make the LMS wing. I am just sitting on the molds.
Yes, we need wings, 3 peice wings, we need a whole bucket of wings,hoods can still be had, or made with an aftermarket scoop,wings on the other hand,aren't made anymore, and maybe it's just me, but i'd rather have the wing before the hood,it just looks better,they go together,a hood without a 3 peice wing? that's like Rick james without Dave Chappelle, or however you spell it. :I :Beer

maybe im stupid but i really need to know how to get one of those awesome cobra r hoods

What about a photo of the Cobra R hood you guys are talking about so we can see what the fuzz is all about?

you mean one of these..................

needs paint........ coming soon though

What about a photo of the Cobra R hood you guys are talking about so we can see what the fuzz is all about?

I believe they are already on this post....

jon dont be surprised when your shi.t is fuc.ked up and i got a cobra hood, j/p

How about getting a fabricator to make a hood with an air inlet right over the air filter? One similar to the Super Mark that Geno has?

I love the look of the Cobra R hood on that black one. Complements the lines. Im not diggin the one on ONEBADMARK8's purple one. Do love the molded wing though.

Ray

Here is another!! :L

:iconcur:

It will make it look faster ! . LoL, I get soo many compliments out here in Chicago from it. I'm very pleased. :Beer
where can i get one of those?is there a certain year,part number,modifications.i have a 94mk8,your ride looks tight,good job!appreciate the info. :give

I love the look of the Cobra R hood on that black one. Complements the lines. Im not diggin the one on ONEBADMARK8's purple one. Do love the molded wing though.

Ray

Thts because it's a 1969 Chevy Camaro Hood!! LOL!

Haha! Now don't you go talkin that Chevrolet blasphemy up in here!! LOL.