Anyone seriously interested in Drag wheels please contact me via PM or Email.

They will be a 3pc forged wheel with many many style choices and anodized finishes if desired. The rears will be 9-10lbs each and front will be 7lbs.

15X4, 15X8 or 15X9
16X4, 16X8 or 16X9
17X3.5 one piece will be available as well.

No they are not cheep.

All inqueries need to go to PM. I won't be responding to the thread.

Cheers

Brad

So here is an update for those interested.

I finally got the final set of mockup wheels in today. Pretty excited about them. They use a billet, hubcentric spacer that is attched with studs. So you can change the inner shell for more width or change your spacer if your needs change. Have a look at the photos.

http://i8.photobucket.com/albums/a23/tcw_fort/BradsWheels/DSCN0632.jpg
http://i8.photobucket.com/albums/a23/tcw_fort/BradsWheels/DSCN0633.jpg
http://i8.photobucket.com/albums/a23/tcw_fort/BradsWheels/DSCN0634.jpg
http://i8.photobucket.com/albums/a23/tcw_fort/BradsWheels/DSCN0635.jpg
http://i8.photobucket.com/albums/a23/tcw_fort/BradsWheels/DSCN0636.jpg
http://i8.photobucket.com/albums/a23/tcw_fort/BradsWheels/DSCN0637.jpg

Make a REAR in 17 too to clear cobra calipers!!!!

GREAT idea man!! Cool deal Brad. GOOD luck selling these.

Make a REAR in 17 too to clear cobra calipers!!!!

They dont even make the 17" front YET bro....I doubt the 17" rear is in the works. Pretty sure the 16's will clear the cobra calipars. Mustang guys are running them so....

Brad

GREAT idea man!! Cool deal Brad. GOOD luck selling these.

Thanks Geno...The manufacturer has been dragging their feet with this project. Its been two sets of mockup wheels in 9 months time...heh

I think this is the finished product.

Brad

They dont even make the 17" front YET bro....I doubt the 17" rear is in the works. Pretty sure the 16's will clear the cobra calipars. Mustang guys are running them so....

Brad

16s fit.