phreakness June 4th, 2007, 06:50 PM hear you go.....
Before:
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/motor/cars005.jpg
During:
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/motor/Picture010.jpg
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/motor/Picture007.jpg
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/motor/Picture004.jpg
After:
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/update/IMG_0692.jpg
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/update/IMG_0691.jpg
2 Lbs. lower pulley
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/update/IMG_0693.jpg
There are alot of little details left to tighten up and should be available soon, like polished fittings, polished fuel rails, Custom CAI, new Coil Covers, etc.
I've got to re-bleed my brakes, drop my tank to fix a "fuel sender" problem (whatever that is) and then it will on the road for a while. Trans upgrade later this summer, Interior and paint this winter. maybe the bottle.
Just a FYI for the newbies:
Yes it is an 04 cobra motor
yes it is in a 97 Lincoln Mark VIII
Yes it runs
No its not been on the track (and may never see one)
No its not been on the Dyno (not a numbers queen either)
skenneyjr June 4th, 2007, 07:06 PM that is one sexy setup there
really really sexy setup
ford nut June 4th, 2007, 07:08 PM Nice.....You must love driving it.
:bow:
m_maker June 4th, 2007, 07:29 PM Jason, you crack me up :D
I'm glad you're getting closer to completion ! Looking good !
driller June 4th, 2007, 07:51 PM No its not been on the track (and may never see one)
No its not been on the Dyno (not a numbers queen either)
Wus. :p
ASMBLYLINE June 4th, 2007, 07:53 PM Great job dude. Awesome integration making that install look stock. Is that coolant tube 2 stock ones chopped together? Awesome idea.
98LSC32V June 4th, 2007, 07:55 PM Nice setup... i'm jealous, all this with the stock hood?
NYC LS8 June 4th, 2007, 08:50 PM That's sweet!
Staffamerica74 June 4th, 2007, 09:15 PM Very nice
phreakness June 4th, 2007, 09:56 PM Wus. :p
Yea I know but the big worry for me is the axles, they suck to swap when you snap one. plus its more of a show car.
Great job dude. Awesome integration making that install look stock. Is that coolant tube 2 stock ones chopped together? Awesome idea.
Stock 04 cobra crossover tube
Nice setup... i'm jealous, all this with the stock hood?
Stock hood with a little notch in the liner for the small pulley.
driller June 4th, 2007, 10:07 PM Yea I know but the big worry for me is the axles, they suck to swap when you snap one. plus its more of a show car.
Bah, broken parts are a chance to upgrade. :D
phreakness June 4th, 2007, 10:11 PM Bah, broken parts are a chance to upgrade. :D
good luck finding upgraded axle's. I've "upgraded" just about every part you can on a gen 2 mark VIII except the axles. They'll have to be a one off custom job.
MediumD June 4th, 2007, 10:43 PM Seems like a total waste to build that and not run it down the 1320 at least once.
ponytail john June 5th, 2007, 05:48 AM Now that is SWEET!!:cool:
torquemonkey June 5th, 2007, 07:34 AM good luck finding upgraded axle's. I've "upgraded" just about every part you can on a gen 2 mark VIII except the axles. They'll have to be a one off custom job.
My .02; http://www.raxles.com/cobrasc.aspx
mlschultz June 5th, 2007, 09:50 AM Congratulations, Jason. Well done. :)
I have a set of SC T-Bird Raxles in my Mark, and so far are doing fine with a couple visits to the track on them. My Vortech build is almost done now, and hope the Raxles continue to do well when the boost is turned up :)
http://img.photobucket.com/albums/v497/papapeach/markmodsraxles002.jpg
http://img.photobucket.com/albums/v497/papapeach/markmods410s003.jpg
http://img.photobucket.com/albums/v497/papapeach/themarksc1005-1.jpg
phreakness June 5th, 2007, 11:18 AM So you got SC T-bird axles from Raxles recently. I talked to them and they said that they didnt do them anymore because of some joint that seems to be the weak link. How much did you pay for them.
mlschultz June 5th, 2007, 12:14 PM I purchased them in October of last year. Marty at Raxles told me the same thing he told you.
I ordered two SC T-Bird axles @ $225 a side against his own advice not to buy them. He said I am going to break them, so be warned. He said the shaft is thick - 1.5", but if I get any wheel hop, chances are real good they will break at the knuckle because they are not the HD ones. He can no longer get the HD knuckles. It is also a reputation thing with him, and I can respect that.
I asked how many automatic Mark VIII's have broken his axles, and he said... one. And that one was due to wheel hop. Alot of manual shift trans T-Birds have snapped theirs though with hard launching. I told him I will take my chances, and I bought them anyways.
Since then, I have added the pinion brace, and also the diff cover brace, to keep things in place, and hopefully stop any wheel hop.
FYI - You can no longer purchase new T-Bird/Mark VIII half shafts from the dealer to compound the problem. Just used, and remans are out there now for purchase. One pair of new Mark axles were found by Torrie back in October - looking through the entire Ford inventory network. I would have bought them, but I already had ordered the Raxles.
If I snap them, I will bite the bullit and go to 31 spline Cobra axles and rear, since I am changing everything over to Mustang 5x4.5 hubs, Forgeline wheels, and Cobra R Brembo front brakes & Baer 2 piece rotors anyway within the next couple weeks when the stuff comes in.
phreakness June 5th, 2007, 03:03 PM If I snap them, I will bite the bullit and go to 31 spline Cobra axles and rear...
sorry bro.
cobra axles are to short by about 2 inches. I've already done the 5x4.5 conversion.
mlschultz June 5th, 2007, 04:45 PM I agree, off the shelf ones will have some fitment issues. But... not to argue this, there are many companies that will custom make them to fit, or make them from scratch. I hope it does not come to that, since I am only looking to lay down 400-450rwhp.
Best of luck with the rest of your build. :)
phreakness June 5th, 2007, 05:05 PM If I decide to install the bottles that I have sitting in the garage I'll be making over 600 but these axles may be the only thing keeping me from doing the install.
phreakness June 11th, 2007, 01:20 PM here are some here are some new pic's
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/update/IMG_0704.jpg
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/update/IMG_0698.jpg
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/update/IMG_0697.jpg
http://i115.photobucket.com/albums/n285/phreaknes/lincoln/update/IMG_0700.jpg
Tractionless June 14th, 2007, 08:49 PM Mlshultz,
Take care of them rear sway-bar bushings while you are at it, if you haven't already!! :p
phreakness June 14th, 2007, 09:05 PM Mlshultz,
Take care of them rear sway-bar bushings while you are at it, if you haven't already!! :p
yea I want to get up as many body mounts and bushings I can. I'm doing alot of research now on where and how to replace them. I'll most likely do it while its getting painted.
|
