I have a CEL on for the codes lean bank 1 and lean bank 2. I have done some research and found that there is the little hose that is under both upper intakes that needs to be replaced. I have the parts and I am donig the work tomorrow, but this is the second time I will have to take all that stuff off to get to somthing under the intake, I have done the Plugs, all 6 coils and the VC gaskets already. I want to know if there is anything else that i should replace fix whatever while i ahve the intake off. I DO NOT to EVER have to take the intake off again. So any input from you guys would be great.
Thanks,
Elisha

Injectors?? Might be something.

Injectors are on top.
My suggestion... any vacuum hoses/wires that are under the intake should be re-routed to on top somewhere so you can get to them easier if there is another problem. Thats what I would do.

I agree I would take the time and just move or make it easier to get to if its under there. Take a look and Photo stuff even to see what other think and see if its in need to be changed.

Sorry if this doesnt make sence I :Beer Had a few :D

I did all the work and it fixed the problem. Hopefully nothing like this will ever happen again. Thanks for your input guys.

Elisha