I need to know the size of the nut holding the front wheel bearing of my '93 Mark VIII?

Need to get a socket for it tomorrow morning.

I need to know the size of the nut holding the front wheel bearing of my '93 Mark VIII?

Need to get a socket for it tomorrow morning.

36MM, if you are gonna remove it you need to buy a new one. They are a 1 time ONLY use nut. Here is the part number for the nut F3LY-3B477-A it should be tightened to 116 - 174 lb-ft according to the tech manual.

36MM, if you are gonna remove it you need to buy a new one. They are a 1 time ONLY use nut. Here is the part number for the nut F3LY-3B477-A it should be tightened to 116 - 174 lb-ft according to the tech manual.

Thanks

does the same hold true for a 2nd Gen?

does the same hold true for a 2nd Gen?

Yes, they are the same size, and the same part number.....if you need or are lookin for Mark VIII part numbers, I have some of them on my site here (http://www.markviii.org/~1wykdmk8/partnumbers.html) if you are lookin for any......and if you see some that are not there, and you have the part number please feel free to email me and I will add them. Just please make sure you tell me what the part actually is, some times the factory designation for them are hard to decipher.

Thanks

No prob....if you need any part numbers you can try here (http://www.markviii.org/~1wykdmk8/partnumbers.html) and see if that helps....if not hook me up with the part numbers and part description......