Ive converted to coils, unplugged the black connector @ the passengers side kick panel. Ive read a few post saying its better to leave it plugged in and to cut the dark and light green air ride wires. There is 3 wires of that color in the black plug. Should i cut them all? Arethey all part of the air ride.

Anyone have a wiring diagram for that harness?

The wire your looking for to defeat the check suspension message is the Dark Green with a Light Green stripe(tracer) located in the gray connector. It is pin #12, circuit 419, on the back row of the gray connector.

Because theres allot of "spaghetti" in there, the easiest way to find this wire, is to disconnect the gray connector and twist it around. The wire color right next to it is Brown with a Pink stripe. The wire on the other side(inside) is an Orange with a Light Blue stripe.

I have the diagram, but it will cost you a cookie.

How are you going to collect on the cookie frog?

I'm gonna send a couple of my guys over to collect it.

Either that, or he can e-Mail it to me.

Hey Frogman, I accidentally cut pin 1 on the black connector. Will this affect anything?

Nah. Should be good to go. It's not like that Air Ride computer really needs electricity to work. :p