Sal329
March 18th, 2007, 02:39 PM
Ok so I am trying to replace the spark plugs on my 94 Mark. I have all the covers off. Except the throttle body hose. How the heck do I remove it? I can't see or feel what tool to use for the rear of it.
Thanks
02LSE96LSC91SE84TC
March 18th, 2007, 02:43 PM
You mean the plastic intake tube?
It has a bolt center if the TB under the cowl and a strap on the pass cover but I'm sure you saw that.
It has a 1/4" square hole in it, use a 1/4" ratchet to remove.
Calabrio
March 18th, 2007, 06:03 PM
Just confirming that-
small bolt right on top, screws into the throttle body. Just remove it carefully, and thread it by hand, it's a pain in the butt if you strip it.
side note: I HATE doing the plugs on this car. I've never had a car that was more trouble to just remove the plug wires on... remember liberal use of the dielectric grease.
Sal329
March 18th, 2007, 06:44 PM
that was the bolt appreciate it
94m5
March 18th, 2007, 10:13 PM
x 2 on the dielectric grease.
The cobra intake system and no beauty covers eases the plug change ALOT.
I can do a set in 10 minutes.