|
|||||
DDE KitSkipper80 November 11th, 2004, 11:23 AM I was just wondering if there is anyone else out there having issues with the LEDs on their DDE Kit. So far i have had to replace the LEDs on the outer rings on both driver and passenger side twice. For some reason they keep buring out. I have them connected to the parking lights. Is it that maybe that i have them connected wrong? Would aftermarket lightbulbs cause them to burn out? Any help would be greatly appreciated. Quik LS November 11th, 2004, 06:18 PM I've had mine for about 6months - all fine. They are tapped into the parking lamps as well. GrayGhost1 November 11th, 2004, 06:47 PM WEll, the LED lights are not designed to take the tremendous amount of heat that is generated in the headlights. I use to sell the the LED DDE's but got away from them. I now sell the CCFL DDE's. They are much more superior to the LED's. Also, I am the only one that has the correct mounting system for the CCFL DDE's. Skipper80 November 27th, 2004, 12:08 PM I've had mine for about 6months - all fine. They are tapped into the parking lamps as well. Do you still have the stock lightbulbs? Quik LS November 28th, 2004, 12:00 AM Do you still have the stock lightbulbs? nope - I run these 7000k ones - http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7937464088&category=36476 really white, really bright - but draws the OE wattage. SurfjaxLS December 18th, 2004, 08:23 PM I've had mine for about 6months - all fine. They are tapped into the parking lamps as well. Quik LS, just wondering about the visibility of the led dde kit at dusk/dawn, and at night with low beams on. Quik LS December 18th, 2004, 08:27 PM i use the new ' 12,000 mcd ' LEDs - and the are bright enough to see during dusk/dawn. They are not as bright as ccfs. SurfjaxLS December 18th, 2004, 08:37 PM Are you still using white/blue leds? Quik LS December 18th, 2004, 08:38 PM nope - upgraded to the bright white ones. SurfjaxLS December 18th, 2004, 08:43 PM where did you purchase the kit, and how hard was it to install? Quik LS December 18th, 2004, 08:48 PM $50 off e-bay - autotecknic.com installing is simple - put your headlamps in the oven at 210 degrees for 15mins - pull them apart, epoxy the rings in, .... the only catch is - only headlamps with grey glue sealent will work. We haven't figured out how to pull the newer ones that use black sealent apart. SurfjaxLS December 18th, 2004, 10:10 PM what model of car was the kit intended for? Quik LS December 18th, 2004, 10:25 PM what model of car was the kit intended for? E36 SurfjaxLS December 18th, 2004, 10:28 PM thanks | |||||
|
Classic Mopar Forum - Mopar - Speed Trap |
|||||
EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum
