TeamFord
October 26th, 2006, 03:22 PM
I have a kit here I need to get rid of. These are a left and right headlamp for th e 2003-2006 model LS with HID lamps. Not sure if you can retofit these to a non HID, but the ballast and ignitor are part of the lamp.
6W4Z-13008-DA List $571.27 LVC $300.00
6W4Z-13008-DB List $571.27 LVC $300.00
Anyone know if these can fit a 2000-2002 model?
jumpman6235
October 26th, 2006, 03:42 PM
they can but you need to replace a bracket that holds the lights
n8bachelor
October 26th, 2006, 04:19 PM
Does anyone know if these will work with a non-HID LS? I imagine anything is possible but is it easy? Couldnt be any much harder than aftermarket HID right? I've been wanting to upgrade to HID for a while now and that seems to be a pretty good deal on the lights. What is the color temp rating on these factory parts?
thanks,
n8
V-8
October 26th, 2006, 04:41 PM
Does anyone know if these will work with a non-HID LS? I imagine anything is possible but is it easy? Couldnt be any much harder than aftermarket HID right? I've been wanting to upgrade to HID for a while now and that seems to be a pretty good deal on the lights. What is the color temp rating on these factory parts?
thanks,
n8
Like the previous poster before you, you need to buy a bracket to get the new lights to go in.
Im pretty sure the stock temperature is probally ~4500k
n8bachelor
October 26th, 2006, 05:07 PM
Like the previous poster before you, you need to buy a bracket to get the new lights to go in.
Im pretty sure the stock temperature is probally ~4500k
I dont think so. I have an 04 LS. These lights are for 03-06 and will fit all those models without modification. I was speaking of the wiring involved. I do not have HID and would like to. Is there a harnass I will need or will I have to do some splicing?
n8
TeamFord
October 26th, 2006, 05:33 PM
Here is what the back of the HID looks like
jgfish97
October 27th, 2006, 12:07 AM
My '06 wasn't equiped with HIDs. But one of those ears can be shaved off and it will work fine. Plugs right in.
Edit: By ears I mean those little nubs on the white connector. No wiring. Just shaving.
SoonerLS
October 27th, 2006, 06:22 AM
Some have fabricated an adapter and hooked up the HIDs to the non-HID system, but the HID wiring is different than the non-HID wiring. Among other things, the HIDs use a relay that the non-HIDs don't have, and the HIDs and non-HIDs connect to different pins at the FEM.
If that's important or not, I don't know.
GWL
October 28th, 2006, 08:41 PM
Does anyone know if these will work with a non-HID LS? I imagine anything is possible but is it easy? Couldnt be any much harder than aftermarket HID right? I've been wanting to upgrade to HID for a while now and that seems to be a pretty good deal on the lights. What is the color temp rating on these factory parts?
thanks,
n8
If your car is a 03+ they are a straight swap. I have done it on my 04 25 min at most. All plugs work without modification. The unit is self contained,
