samuelsteven
June 11th, 2006, 04:52 AM
Doesmy 1999 cadillac sts have a drivers information center that will read error codes out to me? How do i access it?
|
||||
|
|
||||
99 sts, drivers information center?samuelsteven June 11th, 2006, 04:52 AM Doesmy 1999 cadillac sts have a drivers information center that will read error codes out to me? How do i access it? ALBUNDY June 11th, 2006, 09:11 PM Doesmy 1999 cadillac sts have a drivers information center that will read error codes out to me? How do i access it? Turn the ignition key to on but do not start the engine. Press the warmer button(on the passenger side arrow up) and the off button at the same time and hold until the car goes through it's sequence. Write down all of the current codes and post back. :wrench Dadillac June 11th, 2006, 09:25 PM For your car, do the following. Have the key in the on or run position (engine can be running). To the right of the instruments, you will see three buttons. Hold in the on/off button, and the ^ button for about 5 seconds. This will cause the DIC to go into diagnostics. The dash will light up like a christmas tree, then go blank. Then it will ask you to run codes. Press the on/off button. It will ask if you want to run all codes. Press the on/off button. Write down the codes (especially if they are current, or history). If you want to clear them at the end, press and hold the on/off button. If you do not want to clear them, just turn the key off. Don samuelsteven June 12th, 2006, 11:41 AM Than Dadillac and albundy,im gonnago to where my cars at and see what codes it givesout, but then how do i know what they mean? Is there a code definition sheet? samuelsteven June 12th, 2006, 02:29 PM Ok, i got the codes. Here they are, hopefully i got them all, that thing was goin fast and i couldnt look and write at the same time. Theres alot of em. B1328 B1327 U1255 U1064 U1128 U1170 B1652 B1344 P0108 P1350 CURRENT B1983 C1780 C1785 C1738 CURRENT samuelsteven June 12th, 2006, 02:30 PM Oh yea, alot of them were under history Dadillac June 12th, 2006, 07:45 PM Do not concern yourself too much with history codes. They just mean that an issue came up, but isn't there any longer. The current codes that you posted I could not find in my FSM. Go to google, type in the code, and see what they mean. That is how I found some that my car has had in the past. Also, when you get codes, it is helpful to post which module it was for (PCM, MSM, IRC, etc). Don bwnunnally June 13th, 2006, 09:05 PM Here is a reference list of 1999 Diagnostic Trouble Codes (DTCs): http://www.caddyinfo.com/dtc_1999.htm | ||||
| Secured Loans:Personal Loans:Loans:Secured Loans:Debt Consolidation |
EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum